Husqvarna EZ4824 BF manual Battery, Replacing battery

Page 36

maintenance

Battery

Your mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

See chart for charging times

WARNING!

Always wear eye protection when around batteries.

Cleaning battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

1.Remove terminal covers.

2.Disconnect BLACK battery cable first, then the RED battery cable and remove the battery from the machine.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until shiny.

5.Coat terminals with grease or petroleum jelly

6.Reinstall battery.

Replacing battery

1.Lift seat and rotate forward.

2.Using two ½" wrenches disconnect BLACK battery cable then RED battery cable.

3.Position deck to lowest setting.

4.Front underside of frame, remove the nuts that secure the battery hold-down.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall battery hold-down and secure with nuts removed in Step 4.

8.Reconnect RED battery cable to positive (+) battery terminal with hex bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and nut

10.Replace terminal boot cover.

11.Lower seat

STANDARD

STATE

APPROXIMATE BATTERY CHARGING TIME*

 

 

TO FULL CHARGE AT 80OF / 27OC

BATTERY

OF

 

 

 

 

 

Maximum Rate at:

 

 

 

 

 

 

CHARGE

 

 

 

 

 

50 Amps

30 Amps

20 Amps

10 Amps

 

 

 

 

 

 

 

 

12.6V

100%

- FULL CHARGE -

 

 

 

 

 

 

12.4V

75%

20 min.

35 min.

48 min.

90 min.

 

 

 

 

 

 

12.2V

50%

45 min.

75 min.

95 min.

180 min.

 

 

 

 

 

 

12.0V

25%

65 min.

115 min.

145 min.

280 min.

 

 

 

 

 

 

11.8V

0%

85 min.

150 min.

195 min.

370 min.

 

 

 

 

 

 

*Charging time depends on battery capacity,

condition, age, temperature and efficiency of charger

IMPORTANT INFORMATION

Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws.

WARNING!

Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

8050-109

Remove battery hold-down to replace battery

36

Image 36
Contents Operator Manual Page Contents Page Introduction Good Service Manufacturing NumberSymbols and decals Remove key before Safety Safety InstructionsGeneral Operation Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Controls Control LocationsSteering Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke ControlFuses Fuel Tank Cutting Height Adjuster Fuel Shut Off ValveAlways raise the deck to the highest position for transport Seat Adjustment Lever Hour MeterTracking Knob Operation TrainingSteering Before Starting Starting the EnginePlace controls in neutral position Press in and turn the ignition key to the start position Weak Battery Positive + terminal on each battery, taking careRunning Operating On Hills Mowing Tips Stopping the Engine Manual Transport ZT-2800 Bypass LinkagesMaintenance Maintenance ScheduleMaintenance Battery Replacing batterySafety System Maintenance Tire PressuresDeck Belt Installation BeltsDeck Belt Removal Belt installation Pump BeltReplacing pump belt Belt removalCutting Blades Adjusting the Mower Deck Leveling deckAnti-scalp rollers Cleaning Use protective glasses when cleaning and washingCaster Wheels HardwareLubrication GeneralFront Wheel Mount Front Wheel BearingsDeck Spindle Deck Outer SpindleTransaxle Fluid Change Filter guardPurging Procedures Problem Cause Maintenance sectionTroubleshooting guide Service StorageWinter Storage Schematics Technical Data EZ4824Engine TransmissionDimension EZ4824 FrameAccessories Torque SpecificationsUSA requirements CE requirementsService Journal Delivery ServiceAction Stamp, signAfter 10 hours Date, mtr reading Stamp, signDaily Service Hour Service Service Journal Service Journal At least once each year Action Date, mtr reading Stamp, sign Service Journal Service Journal Page 115 364426R1 03/01/10

EZ4824 BF specifications

The Husqvarna EZ4824 BF is a premium riding mower designed for homeowners who demand performance, comfort, and durability. This machine is ideal for properties with medium to large lawns, offering a combination of innovative features and exceptional engineering that makes lawn care an enjoyable task.

One of the standout features of the Husqvarna EZ4824 BF is its robust 24 horsepower Briggs & Stratton engine. This powerful engine provides reliable performance, enabling the mower to tackle tough grass and hilly terrain with ease. The engine's design emphasizes ease of maintenance, ensuring that users can keep it running smoothly with minimal effort.

The EZ4824 BF flaunts a 48-inch cutting deck, which allows for efficient mowing and quick job completion. The deck is constructed from high-quality materials for durability and longevity, featuring a compact design that enhances maneuverability around obstacles such as trees and garden beds. The cutting height is adjustable, offering six different positions so users can achieve their desired grass length.

One of the prominent technological features of this riding mower is the Zero-Turn technology, allowing the EZ4824 BF to pivot on its axis. This makes turning and maneuvering around tight spots much easier compared to traditional mowers. The dual hydrostatic transmission system provides a smooth and responsive driving experience, enabling users to control speed and direction with precision.

Comfort is a major consideration in the design of the Husqvarna EZ4824 BF. The ergonomic seat is designed to provide optimal support during long mowing sessions. Its adjustable armrests further enhance comfort, allowing users to navigate their lawns without fatigue. The intuitive dashboard includes an easy-to-read fuel gauge, hour meter, and other essential controls, making the mower user-friendly for individuals of all experience levels.

Safety features are integral to the Husqvarna EZ4824 BF, with an automatic blade engagement system and a safety switch under the seat that automatically stops the blades when the operator leaves the seat. This promotes a secure mowing experience.

In summary, the Husqvarna EZ4824 BF combines power, maneuverability, and comfort with advanced technology to deliver a superior mowing experience. Whether you are a novice or an experienced mower, this machine is engineered to meet your lawn care needs effectively and efficiently. The blend of performance and user-friendly design makes the EZ4824 BF a standout choice in the riding mower market.