Husqvarna EZ4824 BF manual Introduction

Page 5

INTRODUCTION

Congratulations

Thank you for purchasing a Husqvarna ride-on mower. This machine is built for superior efficiency to rapidly mow primarily large areas. A control panel easily accessible to the operator and a hydrostatic transmission regulated by steering controls both contribute to the machine’s performance.

This manual is a valuable document. Read the contents carefully before using or servicing the machine. The following of instructions (use, service, maintenance) by all who operate this machine is important for the safety of the operator and others. It can also considerably increase the life span of the machine and increase its resale value.

If you sell your machine, be sure to give the operator’s manual to the new owner.

The final chapter of this operator’s manual provides a Service Journal. Ensure that service and repair work are documented. A well-kept service journal reduces service costs for the maintenance and affects the machine’s resale value. Please contact your dealer for more information. Take the operator’s manual along when the machine is taken to your dealer for service.

General

In this operator’s manual, left and right, backward and forward are used in relation to the machine’s normal driving direction.

Continuous dedication to improve our products require that specifications and design are subject to change without notice.

Driving and Transport on Public Roads

Check applicable road traffic regulations before transporting on public roads. If the machine is transported, you must always use approved fastening equipment and ensure that the machine is well anchored. DO NOT operate this machine on public roadways.

Towing

If machine is equipped with a tow hitch, use extreme caution when towing. Never allow children or others in or on the towed equipment. Make wide turns to avoid jack-knifing. Travel slowly and allow extra distance to stop.

Do not tow on sloped ground. The weight of the towed equipment may cause loss of traction and loss of control.

Follow the manufacturer's recommendation for weight limits for towed equipment. Do not tow near ditches, canals, and other hazards.

Operating

This machine is constructed only for mowing grass on lawns and even ground without obstacles such as stones, tree stumps, etc. The machine can also be used for other tasks when equipped with special accessories provided by the manufacturer. Operating instructions for the accessories are provided with delivery. All other types of uses are incorrect. The manufacturer’s directions concerning operation, maintenance, and repairs must be carefully followed.

Lawn mowers and all power equipment, can be potentially dangerous if used improperly. Safety requires good judgement, careful use in accordance with these instructions and common sense.

The machine must only be operated, maintained, and repaired by persons familiar with the machine’s special characteristics and who are also knowledgeable about the safety instructions. Use only approved repair parts to maintain this machine.

Accident prevention regulations, other general safety regulations, occupational safety rules, and traffic regulations must be followed without fail.

Unauthorized modifications to the design of the machine may absolve the manufacturer from liability for any resulting personal injury or property damage.

5

Image 5
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Control Locations ControlsSteering Control Levers Throttle Control Blade SwitchParking Brake Fuses Ignition SwitchChoke Control Fuel Tank Always raise the deck to the highest position for transport Cutting Height AdjusterFuel Shut Off Valve Tracking Knob Seat Adjustment LeverHour Meter Steering OperationTraining Starting the Engine Before StartingPlace controls in neutral position Press in and turn the ignition key to the start position Positive + terminal on each battery, taking care Weak BatteryRunning Operating On Hills Mowing Tips Stopping the Engine ZT-2800 Bypass Linkages Manual TransportMaintenance Schedule MaintenanceMaintenance Replacing battery BatterySafety System Tire Pressures MaintenanceDeck Belt Removal Deck Belt InstallationBelts Pump Belt Belt installationReplacing pump belt Belt removalCutting Blades Leveling deck Adjusting the Mower DeckAnti-scalp rollers Use protective glasses when cleaning and washing CleaningCaster Wheels HardwareGeneral LubricationFront Wheel Bearings Front Wheel MountDeck Spindle Deck Outer SpindleFilter guard Transaxle Fluid ChangePurging Procedures Maintenance section Problem CauseTroubleshooting guide Winter Storage ServiceStorage Schematics EZ4824 Technical DataEngine TransmissionEZ4824 Frame DimensionTorque Specifications AccessoriesCE requirements USA requirementsDelivery Service Service JournalAction Stamp, signDate, mtr reading Stamp, sign After 10 hoursDaily Service Hour Service Service Journal Service Journal At least once each year Action Date, mtr reading Stamp, sign Service Journal Service Journal Page 115 364426R1 03/01/10

EZ4824 BF specifications

The Husqvarna EZ4824 BF is a premium riding mower designed for homeowners who demand performance, comfort, and durability. This machine is ideal for properties with medium to large lawns, offering a combination of innovative features and exceptional engineering that makes lawn care an enjoyable task.

One of the standout features of the Husqvarna EZ4824 BF is its robust 24 horsepower Briggs & Stratton engine. This powerful engine provides reliable performance, enabling the mower to tackle tough grass and hilly terrain with ease. The engine's design emphasizes ease of maintenance, ensuring that users can keep it running smoothly with minimal effort.

The EZ4824 BF flaunts a 48-inch cutting deck, which allows for efficient mowing and quick job completion. The deck is constructed from high-quality materials for durability and longevity, featuring a compact design that enhances maneuverability around obstacles such as trees and garden beds. The cutting height is adjustable, offering six different positions so users can achieve their desired grass length.

One of the prominent technological features of this riding mower is the Zero-Turn technology, allowing the EZ4824 BF to pivot on its axis. This makes turning and maneuvering around tight spots much easier compared to traditional mowers. The dual hydrostatic transmission system provides a smooth and responsive driving experience, enabling users to control speed and direction with precision.

Comfort is a major consideration in the design of the Husqvarna EZ4824 BF. The ergonomic seat is designed to provide optimal support during long mowing sessions. Its adjustable armrests further enhance comfort, allowing users to navigate their lawns without fatigue. The intuitive dashboard includes an easy-to-read fuel gauge, hour meter, and other essential controls, making the mower user-friendly for individuals of all experience levels.

Safety features are integral to the Husqvarna EZ4824 BF, with an automatic blade engagement system and a safety switch under the seat that automatically stops the blades when the operator leaves the seat. This promotes a secure mowing experience.

In summary, the Husqvarna EZ4824 BF combines power, maneuverability, and comfort with advanced technology to deliver a superior mowing experience. Whether you are a novice or an experienced mower, this machine is engineered to meet your lawn care needs effectively and efficiently. The blend of performance and user-friendly design makes the EZ4824 BF a standout choice in the riding mower market.