Husqvarna CTH2036 TWIN owner manual Know Your Tractor

Page 12

OPERATION

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

 

SERVICE

ROS "ON"

 

REMINDER/

IGNITION

POSITION

HOURMETER

ATTACHMENT

SWITCH

 

 

CLUTCH SWITCH

 

 

 

 

LIFT LEVER

 

 

PLUNGER

CLUTCH/BRAKE

 

LIGHT SWITCH

PEDAL

 

 

 

 

ATTACHMENT

 

 

LIFT LEVER

THROTTLE

 

 

CONTROL

 

 

CHOKE

CONTROL

HEIGHT

ADJUSTMENT KNOB

PARKING BRAKE

MOTION

CONTROL

LEVER

FREEWHEEL

CONTROL

03083

FIG. 9

Our tractors conform to the applicable safety standards of the American National Standards Institute.

ATTACHMENT CLUTCH SWITCH - Used to engage the mower blades, or other attachments mounted to your tractor.

ATTACHMENT LIFT LEVER - Used to raise and lower the mower deck or other attachments mounted to your tractor.

CHOKE CONTROL - Used when starting a cold engine.

CLUTCH/BRAKE PEDAL - Used for declutching and brak- ing the tractor and starting the engine.

FREEWHEEL CONTROL - Disengages transmission for pushing or slowly towing the tractor with the engine off.

HEIGHT ADJUSTMENT KNOB - Used to adjust the mower cutting height.

SERVICE REMINDER/HOURMETER - Indicates when service is required for the engine and mower.

IGNITION SWITCH - Used for starting and stopping the engine.

LIFT LEVER PLUNGER - Used to release attachment lift lever when changing its position.

LIGHT SWITCH - Turns the headlights on and off. MOTION CONTROL LEVER - Selects the speed and direction of tractor.

PARKING BRAKE - Locks clutch/brake pedal into the brake position.

THROTTLE CONTROL - Used to control engine speed.

REVERSE OPERATION SYSTEM (ROS) "ON" POSITON - Allows operation of mower deck or other powered attach- ment while in reverse.

12

Image 12
Contents CTH2036 Twin Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService III. ChildrenIV. Towing Table of Contents Unassembled Parts Assembly Tools Required for AssemblyTo Remove Tractor from CAR- TON Before Removing Tractor from SkidInstall Seat See Fig To Install Bagger Components to Tractor See Figs A-4D To Assemble Bagger See Figs A-5CBagger Adjustment See Horizontal AdjustmentVertical Adjustment To Assemble and Install Mulcher Plug See FigCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig Using the Reverse Operation System See FigTo Operate Mower See Fig Reverse Operation System ROSService REMINDER/HOUR Meter To Operate on HillsTo Transport See Figs Before Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Mulching Mowing TipsTo Dump Bagger See To Convert Mower SeeBagging See Maintenance Lubrication ChartTractor Blade CARESee Figs.20-22Star Pattern Blade Engine Cleaning Service and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Replace Mower Blade Drive Belt See Fig To Check BrakeTo Adjust Steering Wheel Alignment Transmission REMOVAL/REPLACEMENTFront Wheel TOE-IN/CAMBER To Adjust Throttle Control Cable To Adjust CarburetorTo Start Engine with a Weak BAT- Tery To Replace Headlight BulbStorage OtherFuel System Engine OILTroubleshooting Points With attachment clutch Schematic TRACTOR- -MODEL NO. CTH2036TWIN 96061021701, Product no 61Electrical KEY Part Description Chassis and Enclosures Chassis and Enclosures Drive TRACTOR- -MODEL NO. CTH2036TWIN 96061021701, Product no 61 Steering Assembly 532 19 Steering Wheel Engine 532 18 Control Throttle Seat Assembly 532 18 SeatDecals Wheels & TiresMower Mandrel Asm CRD LH Threads SVC Mower Lift Bagger 532 16 52-49 Tube Handle Bagger CRDService Notes Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation 532 41 55-01 Rev 07.07.08 AP