Husqvarna DT18BF, SD22B5DSA, 966067101, DTF6(BF) Engine, Fueling, Cutting Unit, Clutch, Depth Lever

Page 16

CONTROLS

Engine

Refer to your engine manual.

Fueling

Read the safety instructions before fueling.

Keep the fuel and fuel tank clean. Avoid filling the machine with dirty fuel. Make sure the fuel cap is properly tightened and the gasket is not damaged, particularly before washing the machine.

Use unleaded gasoline with minimum 86 octane rating. Never use gasoline mixed with two-cycle oil. For ethanol and methanol fuel, the following applies:

Maximum allowable ethanol 10% (volume). Maximum allowable methanol 5% (volume).

Maximum allowable MTBE (Methyl Tertiary Butyl Ether) 15% (volume).

The engine can be damaged if it knocks or pings at normal load. Drain the fuel tank and replace with fresh fuel. If this does not help, contact an authorized service workshop.

Do not fill the tank completely; leave space for the fuel to expand as it warms up.

Cutting Unit

Depth Lever

Use the depth lever to raise and lower the blades between working and transport position. The depth lever has a lock-out bolt that should be left in until the blades wear down. Then move the bolt to a lower hole to allow the blades to penetrate the soil.

•Flail Blades or Spring Tines Set blade or tine depth so that the blades or tines just touch on a flat surface such as a sidewalk or driveway.

•Delta Blades Set blades to penetrate the soil to a depth of 1/8" to ¼" with a maximum penetration of ½". Check seed bag for the manufacture’s recommended depth of application

•Lawns with deep thatch exceeding ¾" may be best dethatched in two treatments (spring and fall) to avoid major shock to an older lawn.

Clutch

The clutch tightens the drive belt and engages the drive for the blades. When the clutch lever is pressed against the handle, the blades begin to rotate. Hold the clutch tightly when working so the belt does not slip.

8011-019-1

WARNING!

Gasoline is highly flammable. Observe caution and fill the tank outdoors. (See the safety instructions.)

8060-016

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Operator Manual Page Contents Good service IntroductionCongratulations Insure your machineSafety Procedures General InformationDecals Xxxx xxx xxxx xx xxxx xDecal Locations Safety General UsePreparations Operating Storage Movement/TransportChildren Fuel System Maintenance Assembly/CONTROLS Controls Engine FuelingCutting Unit ClutchBlade versatility Flail BladesDelta Blades Spring TinesDethatching Before StartingFinishing Seed Application Chart Seed ApplicationBagger Attachment and Removal Preparing the LawnMaintenance Maintenance ScheduleDrive Belt Flail Blades Wear/Rotation/ReplacingWhen tipping the machine forward observe the Two Minute Rule Replacing worn flail bladesSpring Tines Delta BladesWear/Replacing Cleaning Two Minute RuleLubrication Lubrication ScheduleBlades HandleTroubleshooting Symptom Engine will not startEngine is under-powered or runs unevenly CauseService Winter StorageTechnical Data Power RakeTechnical Data Action Date, stamp, signature Delivery service Service JournalAfter the first 20 hours 1. Change engine oil Page Page Page 115 160427R2 02/10/10

966067801, DTF226, 966067201, 966067001, DTF6(BF) specifications

The Husqvarna SD22B5DSA, DTF226, DT18BF, DTF6(BF), and 966067801 models are expertly engineered machines designed for efficiency and reliability in various outdoor tasks. Each model accommodates unique user needs while maintaining Husqvarna’s commitment to high performance and durability.

The Husqvarna SD22B5DSA is a walk-behind lawn mower that boasts a powerful engine and a robust cutting deck. Its self-propelled feature makes mowing effortless, allowing users to navigate different terrains with ease. The adjustable cutting height enables customization for various grass lengths, resulting in a high-quality cut every time. Built with ergonomic handles, this model enhances user comfort, reducing fatigue during extended usage.

The DTF226 is a versatile tiller ideal for gardening and landscaping. Equipped with a high-torque engine, it provides strong performance for breaking ground and cultivating soil. The adjustable tilling width allows flexibility for different garden sizes, ensuring efficiency in soil preparation. Its robust construction promises longevity, even in demanding conditions, while its lightweight design allows for easy maneuverability and storage.

The DT18BF is another capable model, notable for its powerful performance in diverse agricultural and horticultural tasks. With features designed for user convenience, the model is equipped with an intuitive control system that enhances operation. Its durable construction ensures consistency and reliability, allowing gardeners to maximize productivity without compromising on quality.

On the other hand, the DTF6(BF) is designed for heavy-duty applications. Its strong and efficient engine, paired with a robust frame, allows for challenging tasks in various soil types. The wide tilling width and adjustable handlebars create a user-friendly experience, enhancing usability over long periods. Its technology facilitates easy start-up and maintenance, ensuring the machine remains operational at all times.

Lastly, the 966067801 model is designed for specific functions, focusing on durability and efficiency. It enhances workflow with features aimed at simplifying tasks and optimizing output. With robust components and innovative technology, it reflects Husqvarna's dedication to providing tools that increase productivity while ensuring user comfort.

Overall, these Husqvarna models exemplify advanced engineering in outdoor machinery, catering to both professional landscapers and gardening enthusiasts. Their individual features and technologies offer a combination of power, efficiency, and user-friendly design, making them excellent choices for various outdoor maintenance tasks.
Top Page Image Contents