Husqvarna 966067201, DT18BF, SD22B5DSA, 966067101, DTF6(BF) General Information, Safety Procedures

INTRODUCTION

General Information

This manual will assist you in the safe operation and proper maintenance of your Husqvarna equipment. Read it thoroughly before attempting to operate the machine. Call your dealer or Husqvarna if additional information is required.

This equipment should not be modified without the manufacturer’s prior written authorization. Doing so may not only affect the equipment’s performance and durability, but also create safety hazards for the operator and the surroundings. Warranty will be void if changes are made to the equipment without the manufacturer’s prior written authorization.

Safety Procedures

DO

•Read all maintenance and service instructions before attempting work.

•Read engine manufacturer’s operating and maintenance instructions.

•Remove spark plug wire before commencing service.

•Before starting, inspect the lawn and remove rocks, wire, string and other objects that might present a hazard.

•Identify and mark all ground objects to be avoided, such as sprinkler heads, stakes, water valves, or clothes line anchors.

•Keep unsupervised children away from the equipment.

•Adopt safe lifting and moving techniques when loading/unloading and moving the equipment.

•Make sure all decals are in place.

•Use the machine only for sowing and dethatching lawns.

DO NOT

•Do not run engine while servicing.

•Do not use on any surface other than grass.

•Do not operate on slopes exceeding 35% grade.

•Do not place hands or feet near moving or rotating parts.

•Do not lift alone.

•Do not run engine in an unventilated space.

•Do not run engine while servicing. Remove spark plug wire before commencing service.

•Do not smoke or allow open flames or sparks near unit, and always stop the engine when refueling

•Do not remove guards when operating.

•Do not modify this equipment.

5