Tine Replacement See Figs , 25 | Husqvarna CRT900 instruction

SERVICE AND ADJUSTMENTS

TINE REPLACEMENT (See Figs. 24, 25 and 26)

CAUTION: Tines are sharp. Wear gloves or other protection when han- dling tines.

A badly worn tine causes your tiller to work harder and dig more shallow. Most important, worn tines cannot chop and shred organic matter as effectively nor bury it as deeply as good tines. A tine this worn needs to be replaced.

NEW TINE

WORN TINE

Fig.24

•To maintain the superb tilling performance of this ma- chine the tines should be checked for sharpness, wear, and bending, particularly the tines which are next to the transmission. If the gap between the tines exceeds 3-1/2 inches they should be replaced or straightened as necessary.

•New tines should be assembled as shown in Fig. 26. Sharpened tine edges will rotate rearward from above.

TRANSMISSION

TINE	3-1/2" MAX	TINE
	3-1/2" MAX

Fig. 25

SHEAR PIN
SHARP EDGE	COUNTER
SHARP EDGE	TINE
	ROTATION

SHEAR PIN

SHARP

EDGE

SHARP EDGE

SHARP

EDGE

HAIRPIN CLIP

SHARP tine_12 EDGES

Fig. 26