ASSEMBLY
BEFORE YOU START TO ASSEMBLE THE GRASS CATCHER
Some mower models may need minor modifications before you can mount the grass catcher to the unit. Look carefully at the mower deck on your unit and compare the deck mandrel to the illustrations below. If your mower deck mandrel looks like STYLE "A", your unit is ready - proceed with the grass catcher assembly. If your mower deck mandrel looks like
STYLE "B", go to the PREPARATION section in this manual.
DECK MANDREL | DECK MANDREL | |
STYLE "A" | ||
STYLE "B" | ||
|
PARTS IDENTIFICATION
|
|
|
| er is |
|
|
|
| tain n |
|
| talle | d.Con whe | |
| is ns | . Rep conta | ||
| perly ently ent |
| ||
| is pro frequ lacem |
|
| |
G | wer unriolesrsatiocaonnr.etaCcinhoemecrmk ebnadged rep |
|
|
|
WARt oNpeINraetear manoeddd. eUtiese only |
|
|
| |
Do noct to wdamag |
|
|
|
|
subjeked or |
|
|
|
|
crac |
|
|
|
|
COVER
UPPER CHUTE
DUMP
BAG
INDICATOR
CHUTE LATCH
|
|
| iner | is |
|
| onta | en |
|
| is ns | talled.laCce winher. |
| |
| . Rep conta |
|
| |
| perly ently ent |
|
| |
| is pro frequ lacem |
|
| |
G | wer unrleiosrastiocaonnr.etaCcinhoemecrmk ebnadged rep |
|
|
|
WARt oNpeINraetear manoeddd. eUtiese only |
|
|
| |
Do noct to wdamag |
|
|
|
|
subjeked or |
|
|
|
|
crac |
|
|
|
|
WHEEL
WEIGHT
GRASS |
| LOWER CHUTE |
CATCHER |
| ATTACHING |
CONTAINERS | LOWER CHUTE | STRAPS |
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor, in the operator's position.
| (1) 3/8" Wrench | (1) Drive Ratchet | |
THESE ARE THE TOOLS YOU WILL NEED TO | (1) 1/2" Socket | (1) 3" or longer Extension | |
(1) 9/16" Socket | (1) Short Handle | ||
ASSEMBLE YOUR GRASS CATCHER: | |||
| Phillips Screwdriver | ||
|
|
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
•Depress clutch/brake pedal fully and set parking brake.
•Place gearshift/motion control lever in neutral (N) position.
• Place attachment clutch in "DISENGAGED" position.
•Turn ignition key "OFF" and remove key.
•Make sure the blade and all moving parts have completely stopped.
•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
6