Husqvarna 232R, 235R, 235FR manual Assembling the blade guard and grass blade

Page 18

ASSEMBLY

Assembly of the blade and trimmer head

Assembling the blade guard and clearing blade

It is extremely important that the disc drive’s/support flange’s guide engages correctly in the cutting equipment’s centre hole when assembling the cutting equipment. Cutting equipment assembled incorrectly can result in serious and/or fatal personal injury.

!WARNING!

Under no circumstances may the cutting equipment be used without an approved guard fitted. See the chapter “Technical data” . If the wrong guard or a defective guard is fitted this can cause serious personal injury.

IMPORTANT INFORMATION

The machine must be equipped with the correct handlebars, blade guard and harness if either a clearing blade or grass blade are to be used.

Assembling the blade guard and grass blade

•

The guard (A) is fitted

 

 

 

using 4 screws (L) and

 

 

 

the support plate (M) as

 

 

 

set out in the diagram.

 

G

 

NOTE! Use the

 

 

 

F

 

recommended blade

 

E

 

guard.

 

D

•

Fit the drive disc (B) on

 

 

 

 

the output axle.

 

 

•

Turn the blade axle until

 

 

 

one of the holes in the

A

B

 

drive disc aligns with the

 

 

 

C

 

hole in the gear housing.

 

 

 

 

•

Insert the locking pin (C)

 

 

 

in the hole so that the

L

 

 

axle is locked.

 

 

•Place the blade (D), support cup (E) and

support flange (F) on the

M

output axle.

 

• Fit the nut (G). The

 

tightening torque of the

 

nut is 35-50 Nm (3,5 - 5

 

kpm). Use the socket

 

spanner in the tool kit.

 

Hold the handle of the

 

spanner as close to the

 

blade guard as possible.

 

The nut is tightened

 

when the spanner is

 

turned against the direction of rotation (left-hand thread).

•The guard (A) is fitted using 4 screws (L) as set out in the diagram. NOTE! Use the recommended blade guard.

•Fit the drive disc (B) on the output axle.

•Turn the blade axle until one of the holes in the drive disc aligns with the hole in the gear housing.

•Insert the locking pin (C) in the hole so that the axle is locked.

•Place the blade (D) and support flange (F) on the output axle.

•Fit the nut (G). The tightening torque of the nut is 35-50 Nm (3.5 - 5 kpm). Use the socket spanner in the tool kit. Hold the handle of the spanner as close to the blade guard as possible. The nut is tightened when the spanner is turned against the direction of rotation (left- hand thread).

•When slacking off and tightening the saw blade nut, the hands may be injured by the blade teeth. Always hold your hand protected by the blade guard. This is facilitated by the use of a long box spanner. The illustration shows the area in which you should keep the box spanner.

L

A

G

F

D

B

C

18 – English

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 225R/RD/RJ 232R/RD 235R 101 89Symbol Explanation SymbolsMax 10000 rpm Contents Safety Instructions Machine‘s safety equipmentPersonal protective equipment Cutting Equipment1 Anti-vibration systemQuick-release Muffler Locking nutVibration damping system Cutting equipment Quick-releaseFiling the grass blade Cutting equipmentSharpening the clearing blade Trimmer headStart General safety instructionsFuel safety Transport and storageBasic safety precautions General working instructionsAdjusting the harness and clearing saw Basic clearing techniquesDesignations Forestry clearing using a saw blade Clearing‘s ABCWorking methods Brush cutting using the saw blade Brush cutting using a grass bladeTrimming Grass trimming using the trimmer headClearing SweepingWhat is WHAT? What is what on the brush cutter?Assembly Assembling the handlebars 235RAssembling the J-handlebars 225RJ Transport position, handlebars and J-handlebarsAssembling the blade guard and grass blade Assembling other guards and cutting equipment Assembling the spray guard and trimmer head Trimmy SII 235RAdjusting the harness and clearing saw AssemblingDismantling Fuel Handling Fuel mixtureFuelling Start and Stop Control before startingStart and stop Maintenance CarburettorFinal setting of the idling speed T Correctly adjusted carburettorHigh speed needle Muffler Cooling systemTwo-part shaft Air filter Spark plugAngle gear Filing the grass bladeWeekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceTechnical Data Technical data 225RJ 225R/RD 232R/RD 235RType Cutting attachment Guard Art No Approved accessories 232R/RD Type Cutting attachmentApproved accessories 235R Type Cutting attachment Guard Ref No«*2o5¬

232R, 235R, 235FR, 225R, 225RD, 225RJ, 232R, 232RD, 235R specifications

Husqvarna, renowned for its expertise in outdoor power equipment, offers a range of robust strimmers that cater to both professional and homeowner needs. Among these are the models 225R, 225RD, 225RJ, 232R, 232RD, 235R, and 235FR. Each of these strimmers boasts unique features, advanced technologies, and characteristics that make them stand out in the competitive landscape.

The Husqvarna 225R is designed for residential use, featuring a lightweight design that ensures ease of maneuverability. Its Smart Start technology allows for quick starting with minimal resistance, making it user-friendly for amateurs and seasoned users alike. The model is powered by a reliable two-stroke engine which strikes an optimal balance between power and fuel efficiency.

The 225RD variant adds versatility with its dual-line cutting system, perfect for tackling thicker grass and weeds. This model also integrates an ergonomic handle, reducing fatigue during extended use and enhancing overall comfort.

Moving on, the 225RJ version is equipped with an adjustable cutting width, allowing users to adapt to various tasks. The reinforced trimmer head ensures durability while the low emissions technology adheres to environmental standards, making it a sustainable choice for the eco-conscious consumer.

The Husqvarna 232R builds on the strengths of its predecessor with increased power output, making it suitable for demanding landscaping tasks. Its robust build quality and sturdy materials enable it to withstand rigorous use, catering perfectly to landscaping professionals.

The 232RD model features a heavier-duty cutting head that facilitates tough weed clearance, ideal for larger properties. Additionally, it maintains a comfortable grip, aiding precision in operation.

The 235R introduces improved fuel efficiency, reducing the environmental impact without sacrificing performance. The easy-to-adjust harness and balance system distribute weight evenly, allowing for prolonged use without discomfort.

Lastly, the 235FR is designed for commercial use, featuring a high-capacity engine that maximizes output efficiency. The frame design allows for operation on steep terrains, ensuring versatility in applications, while the anti-vibration technology minimizes strain on the user’s hands, making long hours of operation more bearable.

In summary, Husqvarna’s lineup of strimmers — the 225R, 225RD, 225RJ, 232R, 232RD, 235R, and 235FR — represents an excellent amalgamation of power, user comfort, and eco-friendliness. Each model is tailored to meet specific needs, whether for homeowners or professionals, ensuring that superior cutting performance and reliability remain at the forefront of outdoor maintenance tasks.
Top Page Image Contents