Husqvarna 16 C, 13 C, 16 AWD, 11 C manual Check the safety system

Page 26

Maintenance

Check the safety system

The machine is equipped with a safety system that prevents starting or driving under the following conditions.

The engine should only be possible to start when the cutting unit is in its raised position and the gear shift lever or hydrostat pedals are in the neutral position.

The driver does not need to be seated in the driver’s seat.

Rider 16 AWD, the engine can not be started if the parking brake is not pressed down.

Make daily inspections to ensure that the safety system works by attempting to start the engine when one of the conditions is not met. Change the conditions and try again.

Check that the engine stops if you temporarily move out of the driver’s seat while the cutting unit is lowered or the gear shift lever/ hydrostat pedals are not in the neutral position.

Start motor

Ignition system

Works

Does not work

Rider 11 C

26 – English

Image 26

Contents Rider 11 C Rider 13 C Rider 16 AWD Rider 16 C Contents Driving and transport on public roads IntroductionDear Customer TowingGood service Serial NumberAfter the ﬁrst 5 hours Service journalPre-delivery service KEY to Symbols SymbolsKEY to Symbols Insure your Rider Safety InstructionsSafety instructions General useDriving on slopes This is what you doMaintenance ChildrenTransport What is WHAT? Location of the controlsPresentation PresentationLifting lever for the cutting unit Cutting height adjustment leverCutting unit SeatClutch control, rear axle Release lever Rider 13 C, Rider 16 CRelease lever Rider 16 AWD Clutch control, front axleStart the engine DrivingBefore starting Remove the cables in the reverse order Starting the engine with a weak batteryConnecting the jump leads For Rider 13 C, Rider 16 AWD and Rider 16 C Driving the RiderCutting tips For Rider 11 CStarting on a slope, manual gearbox, Rider 11 C Stop the engineMaintenance Maintenance scheduleRemoving of the machine hoods CleaningChecking and adjusting the steering wires Checking the brake Rider 11 C Adjusting the brake Rider 11 CAdjusting the parking brake Rider 13 C, Rider 16 C Result in reduced braking abilityReplacing the air ﬁlter Adjusting the parking brake Rider 16 AWDAdjusting the throttle wire Can result in reduced braking abilityChecking the tyre pressure Replacement of fuel ﬁlterChecking the fuel pump’s air ﬁlter Fuses Check the level of the battery acidIgnition system Replacing the spark plugCheck the safety system Rider 13 C, Rider 16 C Rider 16 AWD Checking the engine’s cooling air intake Adjusting the parallelism of the cutting unitWhen the engine is running. Mind your ﬁngers Checking the cutting unit’s parallelismService position for the cutting unit Placing in the service positionRemoving the BioClip plug Restoring from service positionChecking the blades Replacing the engine oil LubricationChecking the engine’s oil level General lubrication Lubricating the belt adjusterLubrication Rider 11 C Rider 16 AWDProcedure Troubleshooting scheduleProblem Winter storage ServiceStorage GuardTechnical Data Rider 13 C Rider 16 AWD Dimensions Rider 16 C Electrical systemEC-declaration of conformity Applies to Europe only Page 1151019-26

11 C, 16 C, 16 AWD, 13 C specifications

Husqvarna is renowned for its high-performance outdoor power equipment, and their line of ride-on mowers, including the Husqvarna 16 C, 16 AWD, 13 C, and 11 C, are no exception. These models are designed for efficiency, reliability, and superior cutting performance, making them ideal for homeowners and landscapers alike.

The Husqvarna 16 C is a robust machine featuring a powerful engine that delivers reliable performance for a variety of mowing tasks. It comes equipped with a cutting deck that ensures a clean and even cut, coupled with adjustable cutting heights to adapt to varying grass types and terrains. This model emphasizes ease of use with its intuitive controls and ergonomic design, providing a comfortable mowing experience.

In contrast, the Husqvarna 16 AWD stands out with its all-wheel drive technology, providing exceptional traction and stability on sloped or uneven surfaces. This feature allows users to tackle challenging terrains without sacrificing performance. The 16 AWD also incorporates innovative air induction mowing technology, which enhances airflow within the cutting deck, resulting in superior grass lift and an even cut. Users will appreciate its maneuverability and precision, making it suitable for a variety of yard sizes and shapes.

The Husqvarna 13 C model is designed for those seeking a compact but powerful mowing solution. It is equipped with a user-friendly control panel and features a tight turning radius, making it highly maneuverable in smaller spaces. Its efficient engine ensures that users can cover more ground in less time, while the adjustable cutting deck accommodates various mowing heights.

Finally, the Husqvarna 11 C is the smallest in the lineup but does not compromise on performance or features. It is ideal for residential use and is particularly suited for tight spaces and intricate landscapes. The 11 C combines lightweight construction with a powerful engine, ensuring that it can handle various mowing tasks with ease. Its compact design allows for easy storage, making it perfect for homeowners with limited storage space.

Each of these models showcases Husqvarna's commitment to innovation and quality. With features such as enhanced safety systems, durable construction, and advanced cutting technologies, they are engineered to deliver excellent performance and durability. Choosing a Husqvarna ride-on mower means investing in a machine that is built to last, providing a reliable solution for all your mowing needs.