Husqvarna 13 C, 16 AWD Safety Instructions, Safety instructions, Insure your Rider, General use

Page 8

SAFETY INSTRUCTIONS

Safety instructions

These instructions are for your safety. Read them carefully.

Insure your Rider

•Check the insurance coverage for your new Rider.

•Contact your insurance company.

•You should have fully comprehensive insurance including: third party, fire, damage, theft and liability

General use

•Read all the instructions in this operator’s manual and on the machine before you start it. Ensure you understand them and then observe them.

WARNING! The ignition system of this

!machine produces an electromagnetic field during operation. This field may under some circumstances interfere with pacemakers.To reduce the risk of serious or fatal injury, we recommend persons with pacemakers to consult their physician and the pacemaker manufacturer before operating this machine.

•Learn how to use the machine and its controls safely and learn to how to stop quickly. Also learn to recognize the safety decals.

•Only allow the machine to be used by adults who are familiar with its use.

•Make sure nobody else is in the vicinity of the machine when you start the engine, engage the drive or drive off.

•Clear the area of objects such as stones, toys, wires, etc. that may become caught in the blades and be thrown out.

•Stop the engine and prevent the engine from being started until you have cleaned the outlet channel.

8 – English

•Look out for the ejector and do not direct it towards anyone.

•Stop the engine and prevent it from starting before you clean the cutting unit.

•Remember that the driver is responsible for dangers or accidents.

•Never carry passengers. The machine is only intended to be used by one person.

•Always look downwards and backwards before and while reversing. Keep watch for both large and small obstacles.

•Slow before cornering.

•Switch off the blades when you are not mowing.

•Take care when rounding a fixed object, so that the blades do not hit it. Never run the machine over foreign objects.

WARNING! This machine can sever hands

!and feet as well as throw objects. Failure to observe the safety instructions can result in serious injuries.

WARNING! Engine exhaust, some of its

!constituents and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive impairment. The engine emits carbon monoxide, which is a colourless, poisonous gas. Do not use the machine in enclosed spaces.

•Only use the machine in daylight or in other well-lit conditions. Keep the machine at a safe distance from holes or other irregularities in the ground. Pay attention to other possible risks.

•Never use the machine if you are tired, if you have consumed alcohol, or if you are taking other drugs or medication that can affect your vision, judgement or co- ordination.

•Keep an eye on the traffic when working close to a road or when crossing it.

•Never leave the machine unsupervised with the engine running. Always stop the blades, apply the parking brake, stop the engine and remove the keys before leaving the machine.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Rider 11 C Rider 13 C Rider 16 AWD Rider 16 C Contents Introduction Dear CustomerDriving and transport on public roads TowingGood service Serial NumberAfter the first 5 hours Service journalPre-delivery service KEY to Symbols SymbolsKEY to Symbols Safety Instructions Safety instructionsInsure your Rider General useDriving on slopes This is what you doMaintenance ChildrenTransport What is WHAT? Location of the controlsPresentation PresentationCutting height adjustment lever Cutting unitLifting lever for the cutting unit SeatRelease lever Rider 13 C, Rider 16 C Release lever Rider 16 AWDClutch control, rear axle Clutch control, front axleStart the engine DrivingBefore starting Remove the cables in the reverse order Starting the engine with a weak batteryConnecting the jump leads Driving the Rider Cutting tipsFor Rider 13 C, Rider 16 AWD and Rider 16 C For Rider 11 CStarting on a slope, manual gearbox, Rider 11 C Stop the engineMaintenance Maintenance scheduleRemoving of the machine hoods CleaningChecking and adjusting the steering wires Adjusting the brake Rider 11 C Adjusting the parking brake Rider 13 C, Rider 16 CChecking the brake Rider 11 C Result in reduced braking abilityAdjusting the parking brake Rider 16 AWD Adjusting the throttle wireReplacing the air filter Can result in reduced braking abilityChecking the tyre pressure Replacement of fuel filterChecking the fuel pump’s air filter Check the level of the battery acid Ignition systemFuses Replacing the spark plugCheck the safety system Rider 13 C, Rider 16 C Rider 16 AWD Adjusting the parallelism of the cutting unit When the engine is running. Mind your fingersChecking the engine’s cooling air intake Checking the cutting unit’s parallelismService position for the cutting unit Placing in the service positionRemoving the BioClip plug Restoring from service positionChecking the blades Replacing the engine oil LubricationChecking the engine’s oil level Lubricating the belt adjuster Lubrication Rider 11 CGeneral lubrication Rider 16 AWDProcedure Troubleshooting scheduleProblem Service StorageWinter storage GuardTechnical Data Rider 13 C Rider 16 AWD Dimensions Rider 16 C Electrical systemEC-declaration of conformity Applies to Europe only Page 1151019-26

11 C, 16 C, 16 AWD, 13 C specifications

Husqvarna is renowned for its high-performance outdoor power equipment, and their line of ride-on mowers, including the Husqvarna 16 C, 16 AWD, 13 C, and 11 C, are no exception. These models are designed for efficiency, reliability, and superior cutting performance, making them ideal for homeowners and landscapers alike.

The Husqvarna 16 C is a robust machine featuring a powerful engine that delivers reliable performance for a variety of mowing tasks. It comes equipped with a cutting deck that ensures a clean and even cut, coupled with adjustable cutting heights to adapt to varying grass types and terrains. This model emphasizes ease of use with its intuitive controls and ergonomic design, providing a comfortable mowing experience.

In contrast, the Husqvarna 16 AWD stands out with its all-wheel drive technology, providing exceptional traction and stability on sloped or uneven surfaces. This feature allows users to tackle challenging terrains without sacrificing performance. The 16 AWD also incorporates innovative air induction mowing technology, which enhances airflow within the cutting deck, resulting in superior grass lift and an even cut. Users will appreciate its maneuverability and precision, making it suitable for a variety of yard sizes and shapes.

The Husqvarna 13 C model is designed for those seeking a compact but powerful mowing solution. It is equipped with a user-friendly control panel and features a tight turning radius, making it highly maneuverable in smaller spaces. Its efficient engine ensures that users can cover more ground in less time, while the adjustable cutting deck accommodates various mowing heights.

Finally, the Husqvarna 11 C is the smallest in the lineup but does not compromise on performance or features. It is ideal for residential use and is particularly suited for tight spaces and intricate landscapes. The 11 C combines lightweight construction with a powerful engine, ensuring that it can handle various mowing tasks with ease. Its compact design allows for easy storage, making it perfect for homeowners with limited storage space.

Each of these models showcases Husqvarna's commitment to innovation and quality. With features such as enhanced safety systems, durable construction, and advanced cutting technologies, they are engineered to deliver excellent performance and durability. Choosing a Husqvarna ride-on mower means investing in a machine that is built to last, providing a reliable solution for all your mowing needs.
Top Page Image Contents