Husqvarna 155 manual Lubrication, Check the engine’s oil level, Changing the oil

Page 43

LUBRICATION

Check the engine’s oil level

Check the oil level in the engine when the Rider stands horizontal with the engine switched off.

Fold open the engine cover.

Release the dip stick and pull out. Wipe off the oil and insert again.

The dip stick must be fully screwed down.

Now release the dip stick again and pull out. Check the oil level.

The oil level should be between the markings on dip stick. If the level approaches the ADD mark, top up with oil to the FULL mark.

The oil is filled in the same hole as for the dip stick.

Fill the oil slowly. Tighten the dipstick correctly before starting the engine. Start and run the engine at idling speed for approx. 30 seconds. Turn off the engine. Wait 30 seconds and check oil level. If necessary fill so that the oil comes up to the ”FULL” mark on the dipstick.

First and foremost use synthetic engine oil class SJ-CF 5W/30 or 10W/30 for all temperature ranges. Mineral oil SAE30, class SF–CC can be used at temperatures > +5°C (40°F).

Do not mix different types of oil.

Changing the oil

The oil should be changed for the first time after 5 hours of running time. Thereafter it should be changed every 50 hours of running time.

With heavy loads or high temperatures replace the oil after every 25 hours.

WARNING!

Engine oil can be very hot if it is drained off directly after the engine is stopped. Therefore allow the engine to cool down first.

1.Place a receptacle under the engine’s drain plug, located on the left-hand side of the engine.

2.Remove the dip stick and drain plug (A).

3.Let the oil run out into the receptacle.

4.Fit the drain plug and tighten.

5.Fill up with oil to the FULL mark on the dip stick. The oil is filled in the same hole for the dip stick. See ”Checking the engine’s oil level” above for filling instructions. The engine holds 1.9 litres (1.8 USqt) of oil.

6.Run the engine warm and then check that there is no leakage from the drain plug.

8009-471

8009-464

8009-465

IMPORTANT INFORMATION

Used engine oil is hazardous to health and environment and must in accordance with the law not be poured out on the ground or in the nature, and must be handed in to a workshop or other designated station for treatment. Avoid skin contact, wash with soap and water in the event of spillage.

English – 41

Image 43
Contents Rider Page Contents III. Children Safe operation practices for ride-on mowersGeneral operation II. Slope operationIntended use IV. ServiceTravel and transport on public roads TowingTowing IntroductionDear customer Travel and transport on public roadsEngine Transmission Safety InstructionsGood service Serial numberStarting Instruction Explanation of SymbolsPlacards General use Safety instructionsKeep children away from the area to be mowed Proceed as follows Driving on slopesChildren MaintenanceDo not smoke when carrying out maintenance Transport Presentation PresentationLocation of the controls Speed limiter Throttle and Choke leverParking brake Lift lever for the cutting unit Cutting unitSeat Lever for adjustment of cutting heightFuelling Cold engine DrivingBefore starting Starting the engineWarm engine Driving the machine Cutting tips Release lever Stopping the engineHours MaintenanceMaintenance schedule Daily Maintenance intervalRight-hand fender Dismantling of the machine hoodsEngine hood Front hoodAdjusting the parking brake Checking and adjustment of the steering wiresInspecting the muffler Adjusting the throttle wireReplacing the air filter Replacement of the fuel filterProcedures on contact with acid Check the level of the battery acidFitting the wrong spark plug type can damage the engine Ignition systemChecking the safety system Checking the tyre pressure Main fuseCheck the engine’s cooling air intake Observe caution to avoid trapping your hand Fitting the cutting unitChecking the cutting unit’s parallelism Installing BioClipRemoving the cutting unit Adjusting the parallelism of the cutting unitReplacing the cutting unit belts Belt replacement on BioClipPlacing in service position Service position for the cutting unit6017-221 6017-222 8009-122 6017-223 Restoring from service position Checking the blades Removal of BioClip plug Combi Replacing the break-pin BioClipCheck the engine’s oil level LubricationChanging the oil General lubrication Lubricating the belt adjusterChange of oil filter Check the transmission’s oil levelProblem Procedure Trouble Shooting ScheduleCover ServiceStorage Winter storageTechnical Data Technical Data Work done Date, mileage, stamp, sign ServicejournalPre-delivery service After first 5 hours´z+H-¶5-¨ English 114 01

155 specifications

The Husqvarna 155 is a standout in the realm of modern lawn care equipment, combining robust performance with innovative technology to meet the needs of both residential and commercial users. A powerful machine designed for efficiency, the Husqvarna 155 is ideal for maintaining medium to large yards, providing an exceptional balance of maneuverability and cutting capability.

One of the most notable features of the Husqvarna 155 is its powerful engine. Equipped with a reliable and efficient gasoline engine, this machine offers impressive horsepower and torque, ensuring that it can handle dense grass and uneven terrain with ease. Furthermore, the engine is designed to reduce fuel consumption and emissions, adhering to modern ecological standards while maintaining high performance.

The cutting deck of the Husqvarna 155 is another highlight. Constructed with high-quality steel for durability, the cutting deck provides a precise and clean cut. The deck size typically ranges from 42 to 54 inches, allowing the mower to cover a large area quickly. Moreover, the adjustable cutting height feature gives users the flexibility to tailor the grass length according to their preferences or the seasonal needs of their lawn.

Husqvarna also integrates advanced technologies into the 155 model. The inclusion of Smart Start technology simplifies the starting process, reducing resistance in the starter cord for effortless ignition. This means less strain on the user and quick access to mowing, even for those less familiar with garden equipment.

Another key characteristic is the ergonomic design of the mower. The handle is adjustable, accommodating various user heights, and it features comfortable grips that reduce vibration during operation. This user-centered approach extends to the overall layout of the controls, making them intuitive and easy to access, thus enhancing the mowing experience.

Additionally, the Husqvarna 155 is built with durability in mind. Its robust frame and high-quality components ensure longevity, even under heavy use. Regular maintenance is straightforward, guided by Husqvarna’s reliable support and easy-to-follow manuals.

In summary, the Husqvarna 155 provides a perfect blend of power, efficiency, and user-friendly features. Its engine performance, intelligent technology, durable construction, and ergonomic design make it an excellent choice for anyone looking to invest in a reliable lawn mower that delivers outstanding results in lawn care. For both homeowners and professionals, the Husqvarna 155 is poised to meet and exceed expectations season after season.