Husqvarna K950 Symbol Explanation, Symbols on the cut-off saw, Symbols in the Operators Manual

Page 2

SYMBOL EXPLANATION

Symbols on the cut-off saw:

WARNING! The cut-off saw can be dangerous! Careless and incorrect use can result in serious or fatal injury to the operator or others.

Please read the instructions carefully and make sure you understand them before using the cut-off saw.

Always wear:

Approved protective helmet

Approved hearing protection

• Protective glasses or visor

This product is in accordance with applicable CE directives.

Warning

Cutting creates a lots of dust which can cause inhalation damages. Use appropriate dust mask or respirator protection. Avoid breathing petrol fumes and exhaust gases. Provide for good ventilation.

Warning

Sparks from the cut-off saw can cause fire in combustible materials such as: petrol (gas), wood, dry grass etc.

Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label.

Symbols in the Operator's Manual:

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective glasses or a visor must be worn.

Run position.

Stop with spring loaded return to Run position.

Stop, in fixed position.

2 – English

Image 2 Contents
K950 Chain Symbols in the Operators Manual Symbol ExplanationSymbols on the cut-off saw Contents Stop switch Safety InstructionsMACHINE’S Safety Equipment Personal Protective EquipmentMuffler Throttle lockGeneral Safety Instructions StorageGeneral Working Instructions Fuel safetyBasic safety precautions Filling/Fuel mixture/StorageWorking speed Using CuttingWet cutting Cutting techniqueEfficient cutting Water cooling KickbackCare and storage GeneralGlazing Cutting EquipmentDiamond chains What is WHAT? What is what on the machine?Assembly How to tension the chain How to change the chain and rimHow to change the clamping force of the bar Fuelling Fuel HandlingFuelmix Start and Stop Start and stopFinal setting of the idling speed T MaintenanceFunctioning, Final setting Operation CarburetorFuel filter Air filterTensioning the recoil spring StarterReplacing a broken or worn starter cord Replacing a broken recoil springSpark plug Ignition systemCooling system MufflerMonthly maintenance Daily maintenanceWeekly maintenance Technical Data Cutting equipmentEU declaration of conformity Only applies to Europe 115 02 ´z+R=¶6%¨ ´z+R=¶6%¨
Related manuals
Manual 24 pages 33.63 Kb