USES, TOOLS, and Assembly, First Time Assembly

USES, TOOLS, AND ASSEMBLY

Uses: Cutting and beveling of 100mm (4”), 150mm (6”), and 200mm (8”) PVC pipe of the following types; ASTM D2241 IPS Gasketed Pipe, and ASTM D3034 Gravity Sewer Pipe (Type SDR 35, and SDR 26). Note that this machine, as supplied, is not designed for cutting AWWA C900 Municipal Water Pipe, or any non-plastic material.

WARNING!

ONLY CUT or BEVEL PVC plastic pipe with a machine equipped with a Speed Mill Accessory!

DO NOT cut other materials with this machine!

DO NOT cut or bevel ductile iron pipe with a machine equipped with a Speed Mill Accessory!

DO NOT use machine as a standard power cutter with- out proper power cutter blade guard.

Tools: 12” (305mm) Diameter Abrasive Blade, with a 1” (25.4mm) arbor (Not Included).

WARNING!

Use ONLY High Speed Reinforced Abrasive Blades with a minimum speed rating of 6300 rpm.

DO NOT use carbide tipped, wood cutting, or circular saw blades with this machine!

First Time Assembly:

Tools Required:

•Screwdriver (for Arbor Lock)(Not Included).

•2” (50.8mm) Socket, and Socket Wrench (Not Included).

•Combination Spanner (supplied with machine).

•Torque Wrench.

Unwrap SpeedMill bowl / Hub Assembly from the packaging. Initially all three sizes of Speed- Mill Bowls (4”, 6”, 8”) are as- sembled to the Hub Assembly.

Change the mounted bowl sizes if desired. Turn the 2” (50.8mm) hub nut Counter- Clockwise to remove.

Lift off the smaller bowls, and configure the bowl / hub as- sembly as desired. Example: 6” and 8” bowl combination is popular. ALWAYS mount the 8” bowl, it may shield operator in case of blade breakage.

CAUTION!

Always install the 8” SpeedMill Bowl (P/N 542 19 61- 89) before using the machine! The 8” SpeedMill must always be installed even if the machine will only be used to cut and bevel smaller diameter pipes. Besides serving as a beveller for 8” pipes the 8” flange is also designed to cover the area between the guard and the flange and to prevent unintentional contact with the blade.

Install and Re-tighten the 2” (50.8mm) hub nut. Torque to 130-215 in-lbs. (15-25 Nm). NOTE: Do not tighten exces- sively – nut will tighten during cutting process – making dis- assembly difficult.

Loosen and remove the blade shaft screw & washer from the power cutter. Use the combi- nation spanner supplied, and a Screwdriver to lock the blade shaft in position, if required.

Use a Screwdriver to lock the blade shaft in position. Push the screwdriver into the slot (see picture) and rotate the ar- bor until the screwdriver stops the rotation.

Verify that 1” (25.4mm) adapter (P/N 506 37 96-25) is pushed onto blade shaft so it contacts the inner flange. The mount- ing surfaces of the flange and bushing arbor must be undam- aged, clean, and free of debris. Verify that the flange (P/N 506 02 87-01) has a diameter of 4.13” (105mm).

Mount a 12” (305mm) diam- eter, 1” (25.4mm) arbor High Speed Reinforced Abrasive Blade (not included) on the blade shaft.

SpeedMill

K 750 specifications

The Husqvarna K 750 is a powerful, versatile cut-off saw designed for professionals in the construction industry. Known for its remarkable performance, durability, and user-friendly features, the K 750 stands out as a reliable tool for cutting various materials, including concrete, asphalt, and masonry.

One of the standout features of the K 750 is its lightweight design. Weighing approximately 11.2 kg (24.7 lbs), it is easy to maneuver, which is crucial when handling demanding cutting tasks. The saw is equipped with a robust 5.0 kW engine that provides ample power for high production rates. The engine’s innovative design reduces fuel consumption while minimizing emissions, making it an environmentally friendly choice without compromising performance.

The K 750 employs Husqvarna's unique technology, the Active Air Filtration system. This advanced filtration system drastically extends the service life of the air filter by up to five times compared to traditional filters. This means reduced maintenance and lower operating costs, making the K 750 an economically sound investment for contractors and professionals. Furthermore, the saw features a powerful, low-vibration engine, which contributes to user comfort during prolonged use.

Another noteworthy aspect of the K 750 is its cutting depth capability. With a maximum cutting depth of 125 mm (4.9 inches), it allows users to efficiently tackle both shallow and deep cuts without needing excessive passes. The saw is compatible with a range of blade options, from diamond blades for cutting concrete to abrasive blades for asphalt, providing versatility for various job sites and materials.

The K 750 also incorporates ergonomic features such as an adjustable handle design, allowing for comfortable use in different positions. The soft-touch handle provides better grip and control, reducing operator fatigue. Additionally, the saw features a newly designed guard system that offers improved safety while maintaining visibility of the cutting area.

In summary, the Husqvarna K 750 cut-off saw is engineered for professionals who demand reliability, efficiency, and convenience. With its powerful engine, innovative air filtration, user-friendly features, and cutting versatility, the K 750 proves to be an essential tool for construction and renovation projects, making it a favored choice among contractors worldwide. Its combination of performance and ergonomic design ensures that it meets the rigorous demands of the job site while maintaining the user's comfort and safety.