Maintenance

MAINTENANCE:

CAUTION!

Allow SpeedMill Bowls to cool before performing any main- tenance.

NOTICE!

DO NOT hold SpeedMill Bowls using a screwdriver or other device through the slots in the bowl. Damage to the bowls or abrasive coating could occur.

DO NOT use a screw driver or similar in the slots of the SpeedMill Bowls to lock the blade. If you do it is likely the flanges will be damages and become unusable.

Use the proper procedure to lock the blade when at- taching or removing the blade or flanges – See below, or see K750 Operation Manual.

When removing the Hub nut, use a Screwdriver to lock the blade shaft in position. Push the screwdriver into the slot (see picture) and rotate the ar- bor until the screwdriver stops the rotation.

Inspect the SpeedMill Bowls

Always inspect the SpeedMill Bowls before you start cut- ting. Small nicks or scratches can be sanded smooth. If the SpeedMill Bowl has been bent or distorted in any way it must be replaced.

Cleaning

Plastic debris from a small- er flange often lodges itself in the bigger flange during cutting. This can easily be removed once the flanges have cooled down.

Use compressed air to blow shavings from Speed- Mill Bowl. DO NOT scrap shavings from bowl using a screwdriver or any other hard metallic tool. Damage to the bowls or abrasive coating could occur.

10 SpeedMill

CONVERTING THE SPEEDMILL TO A REGU- LAR POWER CUTTER.

The guard on the SpeedMill is designed to work together with the special outer flange and SpeedMill Bowls used on the SpeedMill. The 8” (200mm) SpeedMill Bowl must always be installed when the SpeedMill is used and the SpeedMill shall not be used for any other purpose than those mentioned in “USES” section of this document. Should you desire to convert the SpeedMill to a regular power cutter you must replace the cutting head with an original 12” or 14” cutting head attachment. We recom- mend you have an authorized dealer do the conversion.

WARNING!

NEVER use the SpeedMill as a regular power cutter!

SPARE PARTS:

The parts required for the SpeedMill Accessory are shown on the next page. For any other parts used on this ma- chine see the power cutter spare parts list (included).

K 750 specifications

The Husqvarna K 750 is a powerful, versatile cut-off saw designed for professionals in the construction industry. Known for its remarkable performance, durability, and user-friendly features, the K 750 stands out as a reliable tool for cutting various materials, including concrete, asphalt, and masonry.

One of the standout features of the K 750 is its lightweight design. Weighing approximately 11.2 kg (24.7 lbs), it is easy to maneuver, which is crucial when handling demanding cutting tasks. The saw is equipped with a robust 5.0 kW engine that provides ample power for high production rates. The engine’s innovative design reduces fuel consumption while minimizing emissions, making it an environmentally friendly choice without compromising performance.

The K 750 employs Husqvarna's unique technology, the Active Air Filtration system. This advanced filtration system drastically extends the service life of the air filter by up to five times compared to traditional filters. This means reduced maintenance and lower operating costs, making the K 750 an economically sound investment for contractors and professionals. Furthermore, the saw features a powerful, low-vibration engine, which contributes to user comfort during prolonged use.

Another noteworthy aspect of the K 750 is its cutting depth capability. With a maximum cutting depth of 125 mm (4.9 inches), it allows users to efficiently tackle both shallow and deep cuts without needing excessive passes. The saw is compatible with a range of blade options, from diamond blades for cutting concrete to abrasive blades for asphalt, providing versatility for various job sites and materials.

The K 750 also incorporates ergonomic features such as an adjustable handle design, allowing for comfortable use in different positions. The soft-touch handle provides better grip and control, reducing operator fatigue. Additionally, the saw features a newly designed guard system that offers improved safety while maintaining visibility of the cutting area.

In summary, the Husqvarna K 750 cut-off saw is engineered for professionals who demand reliability, efficiency, and convenience. With its powerful engine, innovative air filtration, user-friendly features, and cutting versatility, the K 750 proves to be an essential tool for construction and renovation projects, making it a favored choice among contractors worldwide. Its combination of performance and ergonomic design ensures that it meets the rigorous demands of the job site while maintaining the user's comfort and safety.