Husqvarna 966648603, 128 L, 128 C manual Technical Data, Technical data

Page 21

TECHNICAL DATA

Technical data

Engine

128C

128L

 

 

Cylinder volume, cu.in./cm3

1.7/28

1.7/28

Cylinder bore, inch/mm

1.4/35

1.4/35

Stroke, inch/mm

1.130/28.7

1.130/28.7

Idle speed, rpm

2,800--3,200

2,800--3,200

Recommended max. speed, rpm

10,000

11,000

Speed of output shaft, rpm

8,000

8,000

Max. engine output, acc. to ISO 8893, hp/kW

1.1/0.8

1.1/0.8

Catalytic converter muffler

Yes

Yes

Speed--regulated ignition system

Yes

Yes

Ignition system

 

 

Manufacturer/type of ignition system

Walbro/CD

Walbro/CD

Spark plug

Champion

Champion

 

RCJ--8Y

RCJ--8Y

Electrode gap, inch/mm

0.024/0.6

0.024/0.6

Fuel and lubrication system

 

 

Manufacturer/type of carburetor

Zama

Zama

Fuel tank capacity, US pint/liter

0.85/0.4

0.85/0.4

Weight

 

 

Weight without fuel, cutting attachment and guard, lbs/kg

10/4.4

11/4.8

Sound levels

 

 

(see note 1)

 

 

Equivalent sound pressure level at the user’s ear,

 

 

measured according to ANSI B175.3--1997, dB(A),

 

 

min/max:

94/97

94/97

Vibration levels

 

 

Vibration levels at handles, measured according to

 

 

ANSIB175.3--1997, m/s2

 

 

At idle, left/right handles:

3/5

3/5

At max. speed, left/right handles:

9/8

9/8

Note 1: Equivalent noise pressure level is calculated as the time--weighted energy total for noise pressure levels under various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

Model 128C (3/8 RH arbor shaft thread)

Approved accessories

Type

Cutting attachment / guard, part. no.

Trimmer head

T25

537 33 83--07 / 545 03 11--01

Model 128L (M10 LH arbor shaft thread)

Approved accessories

Type

Cutting attachment / guard, part. no.

Trimmer head

T25

537 33 83--06 / 545 03 09-01

Plastic blades

Tricut 300 mm

531 00 38--11 / 545 03 09-01

545196750 Rev. 3 2/17/09

English--- 21

Image 21
Contents 128 L, 128 C Contents KEY to Symbols SymbolsOnly intended for trimmer heads Machine’s safety equipment Safety InstructionsStop switch Personal protective equipmentMuffler Cutting attachment guardCutting equipment Trimmer head is intended for trimming grassSafety Instructions Trimmer head General rulesTrimmer line of the same diameter Safety instructions regarding the surroundings General safety precautionsSafety instructions before starting work Personal protectionBasic safety rules Fuel safetyGeneral working instructions StartingBasic working techniques ClearingCutting Sweeping 128L 128C Know Your TrimmerKnow your trimmer Primer bulbFitting the loop handle AssemblyFitting the trimmer guard and trimmer head Model 128L Fitting the trimmer guard and trimmer head Model 128CFuel Handling Fuel mixtureFueling Check before starting Starting and StoppingStarting and stopping Cold engineCarburetor MaintenanceMuffler Unit/Maintenance SafetySpark plug Muffler bolts Spark arrestor mesh Rev 2/17/09Maintenance schedule Air filterBevel gear 128L Trimmer Head Line Loading Instructions Plastic Blades Tri Cut Technical data Technical DataWarranty Statement Following items are not covered by this warrantyNatural discoloration of material due to ultraviolet light Warranty Commencement Date Emission Control Warranty Parts List

128 C, 128 L, 966648603 specifications

The Husqvarna 128 C and 128 L are powerful and versatile trimmers designed for homeowners and gardeners looking for efficient and reliable gardening tools. These models, identified by the part number 966648603, embody cutting-edge technology and ergonomic design, making them ideal for tackling various lawn care tasks.

One of the standout features of the Husqvarna 128 C and 128 L is their lightweight and balanced construction. Weighing approximately 10.36 lbs, these trimmers are easy to handle, reducing fatigue during extended use. The design is optimized to allow users to reach difficult areas without straining, making them perfect for trimming grass, weeds, and unwanted foliage in tight spots.

Both models are equipped with a 28cc, 2-cycle engine that delivers reliable performance. This engine is capable of running at high speeds, ensuring efficient cutting even in dense vegetation. The Easy Start technology incorporated into these trimmers simplifies the starting process, requiring less effort from the user. This user-friendly feature is particularly beneficial for those who may find starting traditional engines challenging.

Another significant characteristic is the Fuel Pump, which provides a steady flow of fuel to the carburetor, ensuring a quick start without manual priming. Additionally, the anti-vibration system greatly enhances user comfort by reducing the amount of vibrations transferred to the hands and arms. This allows for longer periods of use without discomfort, making this trimmer a practical option for larger lawns and gardens.

The Husqvarna 128 C model features a curved shaft design, which allows for easy maneuverability and access to challenging areas. In contrast, the 128 L comes with a straight shaft, providing increased reach and the ability to tackle tougher tasks, such as edging. Both models come with a Tap 'N Go twin line cutting system, which allows for easy line replacement while minimizing downtime.

In conclusion, the Husqvarna 128 C and 128 L trimers are excellent choices for those looking for reliable and efficient garden maintenance tools. With their lightweight design, powerful engines, and ergonomic features, they cater to the needs of homeowners who demand quality and performance in their gardening equipment. Whether you’re maintaining a small yard or managing a larger garden, these trimmers offer the versatility and reliability needed for effective lawn care.