Husqvarna 966648603 Fuel safety, General working instructions, Starting, Transporting and storage

Page 9

SAFETY INSTRUCTIONS

SCheck that the trimmer head and guard are correctly secured.

SWhen adjusting the carburetor, make sure the lower end is supported and that no one is in the immediate vicinity.

SMake sure the cutting head does not rotate when idling.

SMake sure the handle and safety features are in order. Never use a machine that has parts missing or has been changed in

relation to the specification.

SOnly use the machine for the purpose for which it was intended.

Starting

WARNING: When the engine is started with the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

SEnsure that all of the engine covers and housings are properly fitted before the unit

is started.

SNever start or attempt to run the unit with the clutch, clutch drum, clutch cover, or

driveshaft removed.

SNever start the machine indoors. Exhaust

fumes can be dangerous if inhaled.

SObserve your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equip- ment.

SSee the “Starting and Stopping” section for complete instructions.

Fuel safety

SAlways use a fuel container with an anti-- spill valve.

SNever refuel the machine while the engine is running.

SAlways stop the engine and let it cool for a

few minutes before refueling.

SMake sure there is plenty of ventilation when refueling or mixing fuel (gasoline and

2--stroke oil).

SMove the machine at least 10 feet (3 me- ters) from the refueling point before start- ing it.

Min. 10 ft.

(3 m)

545196750 Rev. 3 2/17/09

SNever start the machine:

S If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

S If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

S If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

S Avoid all skin contact with fuel. Fuel is a skin irritant and may even cause skin changes.

Transporting and storage

SStore and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electri- cal machinery, electric motors, electrical

relays/switches or boilers.

SWhen storing and transporting fuel al- ways use approved containers intended for this purpose.

SWhen storing the machine for long peri- ods the fuel tank must be emptied. Con- tact your local gas station to find out

where to dispose of excess fuel.

SEnsure the machine is cleaned and that a complete service is carried out before long--term storage.

WARNING: Take care when han- dling fuel. Bear in mind the risk of fire, explosion and inhaling fumes.

General working instructions

IMPORTANT!

This section describes the basic safety pre- cautions for working with trimmers. If you encounter a situation where you are uncer- tain how to proceed you should ask an ex- pert. Contact your servicing dealer.

Avoid all usage which you consider to be beyond your capability.

You must understand the difference between forestry clearing, grass clearing and grass trimming before use.

Basic safety rules

1. Look around you:

STo ensure that people, animals or other things cannot affect your control of the machine.

STo ensure that people, animals, etc., do not come into contact with the cut- ting attachment or loose objects that are thrown out by the cutting attach- ment.

English--- 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 128 L, 128 C Contents KEY to Symbols SymbolsOnly intended for trimmer heads Machine’s safety equipment Safety InstructionsStop switch Personal protective equipmentMuffler Cutting attachment guardCutting equipment Trimmer head is intended for trimming grassSafety Instructions Trimmer head General rulesTrimmer line of the same diameter Safety instructions regarding the surroundings General safety precautionsSafety instructions before starting work Personal protectionBasic safety rules Fuel safetyGeneral working instructions StartingBasic working techniques ClearingCutting Sweeping 128L 128C Know Your TrimmerKnow your trimmer Primer bulbFitting the loop handle AssemblyFitting the trimmer guard and trimmer head Model 128L Fitting the trimmer guard and trimmer head Model 128CFuel Handling Fuel mixtureFueling Check before starting Starting and StoppingStarting and stopping Cold engineCarburetor MaintenanceMuffler Unit/Maintenance SafetySpark plug Muffler bolts Spark arrestor mesh Rev 2/17/09Maintenance schedule Air filterBevel gear 128L Trimmer Head Line Loading Instructions Plastic Blades Tri Cut Technical data Technical DataWarranty Statement Following items are not covered by this warrantyNatural discoloration of material due to ultraviolet light Warranty Commencement Date Emission Control Warranty Parts List

128 C, 128 L, 966648603 specifications

The Husqvarna 128 C and 128 L are powerful and versatile trimmers designed for homeowners and gardeners looking for efficient and reliable gardening tools. These models, identified by the part number 966648603, embody cutting-edge technology and ergonomic design, making them ideal for tackling various lawn care tasks.

One of the standout features of the Husqvarna 128 C and 128 L is their lightweight and balanced construction. Weighing approximately 10.36 lbs, these trimmers are easy to handle, reducing fatigue during extended use. The design is optimized to allow users to reach difficult areas without straining, making them perfect for trimming grass, weeds, and unwanted foliage in tight spots.

Both models are equipped with a 28cc, 2-cycle engine that delivers reliable performance. This engine is capable of running at high speeds, ensuring efficient cutting even in dense vegetation. The Easy Start technology incorporated into these trimmers simplifies the starting process, requiring less effort from the user. This user-friendly feature is particularly beneficial for those who may find starting traditional engines challenging.

Another significant characteristic is the Fuel Pump, which provides a steady flow of fuel to the carburetor, ensuring a quick start without manual priming. Additionally, the anti-vibration system greatly enhances user comfort by reducing the amount of vibrations transferred to the hands and arms. This allows for longer periods of use without discomfort, making this trimmer a practical option for larger lawns and gardens.

The Husqvarna 128 C model features a curved shaft design, which allows for easy maneuverability and access to challenging areas. In contrast, the 128 L comes with a straight shaft, providing increased reach and the ability to tackle tougher tasks, such as edging. Both models come with a Tap 'N Go twin line cutting system, which allows for easy line replacement while minimizing downtime.

In conclusion, the Husqvarna 128 C and 128 L trimers are excellent choices for those looking for reliable and efficient garden maintenance tools. With their lightweight design, powerful engines, and ergonomic features, they cater to the needs of homeowners who demand quality and performance in their gardening equipment. Whether you’re maintaining a small yard or managing a larger garden, these trimmers offer the versatility and reliability needed for effective lawn care.
Top Page Image Contents