Husqvarna 335LS Spark plug, Cleaning the air filter, Oiling the air filter, Must always be replaced

Page 21

MAINTENANCE

Cleaning the air filter

Remove the air filter cover and take out the filter. Wash it clean in warm, soapy water. Ensure that the filter is dry before refitting it.

An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter

must always be replaced.

If the machine is used in dusty conditions the air filter should be soaked in oil. See instructions under the heading Oiling the air filter.

Oiling the air filter

Always use special filter oil. Filter oil contains a solvent to make it spread evenly through the filter.You should therefore avoid skin contact.

Put the filter in a plastic bag and pour the filter oil over it. Knead the plastic bag to distribute the oil. Squeeze the excess oil out of the filter inside the plastic bag and pour off the excess before fitting the filter to the machine. Never use common engine oil. This would drain through the filter quite quickly and collect in the bottom.

Spark plug

The spark plug condition is influenced by:

•Incorrect carburetor adjustment.

•An incorrect fuel mixture (too much or incorrect type of oil).

•A dirty air filter.

These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties.

If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.020 inch (0.5 mm).The spark plug should be replaced after about a month in operation or earlier if necessary.

CAUTION! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder. Check that the spark plug is fitted with a suppressor.

Note: Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others. Your warranty does not cover damage or liability caused by the use of accessories and/or attachments not specifically recommended by HUSQVARNA.

English – 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 335LS 335LX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the clearing saw? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentStop switch Cutting attachment guardVibration damping system Muffler Cutting equipment Trimmer headIncrease the risk of accidents Assembly Fitting the loop handleAssembling the cutting equipment Fuel safety Fuel HandlingFuel Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping Basic safety rules Working TechniquesGeneral working instructions Grass trimming with a trimmer head Basic working techniquesCarburetor MaintenanceCorrectly adjusted carburetor Fine adjustment of the idle speed TMuffler High speed jet HCooling system Bevel gearAir filter Spark plug Cleaning the air filterOiling the air filter Must always be replacedMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataYour Warranty Rights and Obligations Emission Warranty Parts List Page S35 25 m T35, T35x T45, T45x Page Page Page Page Page 1151411-95
Related manuals
Manual 32 pages 12.26 Kb

335LS specifications

The Husqvarna 335LS is a versatile and robust string trimmer designed for both professional landscapers and avid gardeners. This machine combines power, efficiency, and user-friendly features, making it an ideal choice for tackling a variety of trimming tasks around the home or on larger job sites.

One of the standout features of the Husqvarna 335LS is its powerful engine. Equipped with a 34.6cc, 2-stroke engine, it delivers high torque over a wide RPM range. This means that users can expect impressive performance while maintaining fuel efficiency, which is crucial for long working hours. The inclusion of the X-Torq technology not only enhances fuel efficiency but also reduces harmful emissions, aligning with today’s environmental standards.

The cutting equipment on the 335LS is designed to handle different types of vegetation effortlessly. It comes with a Tap 'N Go trimmer head that allows for easy line feeding, ensuring continuous operation without interruptions. This feature is particularly beneficial when dealing with thick grass or weeds, as users can quickly extend the cutting line as needed.

Another significant characteristic of the Husqvarna 335LS is its lightweight design. Weighing just under 12 pounds, it is easy to maneuver without causing fatigue. The ergonomically designed handle provides a comfortable grip, which allows for extended use without discomfort. Additionally, the adjustable handle helps users find their ideal working position, further enhancing comfort and control.

The machine is also equipped with a smart start function, which reduces the resistance in the starter cord, allowing for easier ignition. This is particularly useful for users who may struggle with traditional starting systems, making the 335LS accessible to a wider audience.

Durability is another key aspect of the Husqvarna 335LS. It features high-quality materials and components designed to withstand the rigors of regular use. This reliability is further bolstered by features such as the heavy-duty gear head and sturdy construction.

In conclusion, the Husqvarna 335LS is designed with innovation and user-friendliness in mind. Its powerful engine, advanced technologies, lightweight design, and ease of use make it an excellent choice for anyone looking to maintain their lawn or complete landscaping tasks. Whether you are a professional or a homeowner, this string trimmer promises exceptional performance and long-lasting service.
Top Page Image Contents