Husqvarna 55 manual General Safety Precautions, Min m, 10 ft

Page 18

SAFETY INSTRUCTIONS

GENERAL SAFETY PRECAUTIONS

1Chain saws are designed solely for cutting wood. The only cutting equipment that can be used with this chain saw are the combinations of bars and chains recommended in the ”Technical data” section.

2 Never use a chain saw if

you are tired, if you have

drunk alcohol, or if you

are taking medication that

7FUEL SAFETY

(Refuelling, fuel mixture, storage.)

Fuel and fuel vapour are highly inflammable. Take care when handling fuel and chain oil. Keep away from naked flames and do not breathe in fuel vapour.

affects your vision, your

judgement or your co-

ordination.

3Always wear suitable protective clothing. See the section on ”Personal protective equipment”.

4Never use a chain saw that has been modified in any way from its original specification.

5Never use a chain saw that is faulty. Carry out the regular checks, maintenance and service routines described in this manual. Some maintenance and service measures must be carried out by trained specialists. See the section on ”Maintenance”.

6STARTING

• Never start a chain saw unless the bar, chain and all covers are fitted correctly. (See section on ”Assembly”).

•Never try to refuel the saw while it is running.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (2-stroke mixture).

•Move the saw at least 3 m from the refuelling point before starting it.

•Never start the chainsaw:

a)If you have spilt fuel or chain oil on the saw. Wipe off the spill and allow remaining fuel to evaporate.

b)If you spill fuel or chain oil on yourself or your clothes. Change your clothes.

c)If there is a fuel leak. Check regularly for leaks from the FUEL CAP and FUEL LINES.

Min. 3 m

(10 ft)

• Never start a chain saw indoors. Exhaust fumes can be dangerous.

• Before starting the saw make sure there are no people or animals nearby who might be put at risk.

• The chain brake must be engaged when starting (see section on ”Starting”). Do not drop start. This method is very dangerous because you may lose control of the saw (see section on ”Starting”).

•Place the saw on the

ground and hold the rear handle down with your right foot. Grasp the front handle firmly using your left hand. Make sure the chain saw is steady and the chain is not touching the ground. Then grasp the starter handle with your right hand and pull the starter cord. Never wrap the starter cord around your hand.

•Always store the chain saw and fuel away from any sources of sparks or naked flames, e.g. machines, electric motors, relays, switches, boilers, etc.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local gas station.

8Never use any accessories other than those recommended in this manual. See the sections on ”Cutting equipment” and ”Technical data”.

The risk of accident is increased if you use the wrong cutting equipment or a chain that is not sharpened correctly. Using the wrong combi- nation of bar and chain can increase the risk of accidents!

18 – English

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operators manual EPA KEY to Symbols SymbolsContents Safety Instructions Chain SAW Safety EquipmentPersonal Protective Equipment Chain brake and front hand guard 3a StartingThrottle lock Chain catcherRight hand guard Stop switch Vibration damping systemMuffler Checking the inertia brake release Checking brake band wearChecking the front hand guard Checking the brake triggerThrottle lock Cutting Equipment 5 basic rulesSaw chain Cutting equipment designed to minimise kickbackBar Some terms that describe the bar and chainSharpening cutting teeth Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Risk of kickback is increased with a badly sharpened chainGeneral advice on setting raker clearance Setting the raker clearanceTensioning the chain Filling with chain oil Lubricating cutting equipmentChain oil Never use waste oilLubricating the bar tip sprocket Checking chain lubrication Needle bearing maintenanceChecking wear on cutting equipment Chain drive sprocketHOW to Avoid Kickback What is kickback?General rules Do not let go of the handlesNever use the saw one- handed General Safety Precautions Min m10 ft Basic safety rules General Working InstructionsTerms Basic cutting techniqueGeneral CuttingLimbing Tree felling techniqueSafe distance Felling directionClearing the trunk and preparing your retreat FellingCutting the trunk into logs General adviceFreeing a tree that has fallen badly = high accident risk Freeing a Trapped treeWhat is WHAT? Assembly Mounting guide bar and chainFuel Handling FuelmixFuelling Min 3 m10ft Stop Start and StopStart Cold engineMaintenance CarburetorChanging a broken or worn starter cord Starter device assemblyStarter device Tensioning the recoil springMuffler Needle bearing maintenanceAir filter Spark plugTemperature -5C or colder Centrifugal cleaning Air InjectionTemperature 0C or colder Cooling systemWeekly maintenance Daily maintenance Monthly maintenanceTechnical Data Obligations Emission Control Warranty StatementYour Warranty Rights 487-5963114 01 2002W16

55 specifications

The Husqvarna 55 chainsaw is a robust and reliable tool that has earned its place among both professional loggers and amateur woodcutters. Designed for hard work, this powerful chainsaw boasts a mix of features and technologies that ensure efficiency, durability, and ease of use, making it an excellent choice for a variety of cutting tasks.

One of the standout features of the Husqvarna 55 is its powerful engine. The chainsaw is equipped with a 3.5 horsepower, 2-stroke petrol engine that generates strong power output, enabling it to tackle demanding cutting jobs effortlessly. The engine is coupled with an advanced air injection system that helps to reduce wear and tear, ensuring the longevity of the saw. This design minimizes the amount of dirt and debris that enters the air filter, thus extending the time between filter cleanings and enhancing performance.

Another key characteristic of the Husqvarna 55 is its weight balance and ergonomic design. Weighing approximately 4.2 kg, the saw is lightweight enough for long periods of use without causing significant fatigue. Furthermore, the design incorporates an anti-vibration system that significantly reduces vibrations felt by the user during operation, allowing for greater control and comfort.

The chainsaw showcases a rapid tensioning system, which allows for quick and effortless adjustment of the chain tension without any tools. This feature is particularly helpful for maintaining optimal chain performance and ensuring safety during operation. The Husqvarna 55 also comes equipped with a safety chain brake system that provides additional protection to the operator, reducing the risk of accidents.

In terms of cutting capacity, the Husqvarna 55 features a bar length of typically 16 inches, making it suitable for various applications, from felling small trees to pruning larger limbs. The combination of the engine power, smooth operation, and the quality of the cutting chain results in efficient, clean cuts.

The durability of the Husqvarna 55 is further enhanced with its sturdy construction, featuring a robust chassis that can withstand the rigors of heavy use. Overall, the Husqvarna 55 is an exceptional chainsaw that combines power, comfort, and safety, making it an outstanding investment for those who demand reliability in their cutting tools. Whether you're a seasoned professional or an enthusiastic hobbyist, the Husqvarna 55 is designed to meet your cutting needs with ease and efficiency.
Top Page Image Contents