Jensen CM715K Dodge/Chrysler/Plymouth, Jeep Grand Cherokee, Dodge Avenger, Plymouth Sebring

Page 11

®

CM715K

Dodge/Chrysler/Plymouth

1.Note the position of brackets on the exist- ing radio.

2.Match the brackets found in the hardware kit to the mounting tabs on your factory radio.

3.Attach the supplied brackets to the chassis of the radio with the four "machine thread" Phillips type screws. Use two screws for each bracket.

Typical Bracket Location

Jeep Grand Cherokee, Dodge Avenger, Plymouth Sebring

1.Note the position of brackets on the exist- ing radio.

2.Match the brackets found in the hardware kit to the mounting tabs on your factory radio.

3.Attach the supplied brackets to the chassis of the radio with the four "machine thread" Phillips type screws. Use two screws for each bracket.

RESET

RESET

11

Untitled-3

11

4/10/99, 7:38 PM

Image 11
Contents Contents InstallationTools and Supplies Needed InstallationPrepare Radio for Installation Adapters for Easier Installation Speaker RequirementsUpgrading Your System ConnectionsCrimp Connections Remove Old Radio Disconnect BatteryFuse Adapters WiringWiring Color Codes Wiring with a Wiring AdapterConnect Wires Install Wiring Inside the CarFuses Wiring Diagram-Advanced InstallationTesting Fader Test Speaker ConnectionsBalance Attach Brackets Jeep Grand Cherokee, Dodge Avenger, Plymouth Sebring Dodge/Chrysler/PlymouthReset Button TroubleshootingSpecifications subject to change without notice Specifications