IMPORTANT: Attach the transport tires before the machine is loaded or unloaded onto a transport vehicle. Otherwise, the rear roller and it’s shaft may become damaged.
To load or unload on a transport vehicle use the following procedure:
1.Make sure the traction drive lever and the cutting reel drive lever are in the disengaged position.
2.The engine is turned off and the fuel shutoff valve is in the “closed” position.
3.Use a full width ramp to load/unload the machine.
4.With one person controlling the brake lever, both people should carefully pull the machine up the ramp and onto the vehicle.
IMPORTANT: Pull the machine, do not push it, up the ramp.
5.Secure the machine to the transporting vehicle.
111132_0409 |