Husqvarna 356 BT X-series, 356BF X-series manual Key To Symbols

Page 3
KEY TO SYMBOLS

KEY TO SYMBOLS

Symbols

WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

• Hearing protection

• Approved eye protection

Gloves should be worn when necessary.

The blower can forcibly throw objects that can bounce back.This can result in serious eye injuries if the recommended safety equipment is not used.

The blower operator must make

sure that no bystanders or animals come nearer than 15 metres. Whenever several operators are

working in the same work area, they should maintain a safe distance of at least 15 metres from one another.

A breathing mask should be used when there is a risk of dust.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

English – 3

Image 3
Contents 356BTX-SERIES 356BFX-SERIES Operator’s manual EPAEnglish Dear customer INTRODUCTIONSymbols KEY TO SYMBOLSCONTENTS ContentsNote the following before starting Personal protective equipment SAFETY INSTRUCTIONSMachine′s safety equipment Stop switchMuffler Vibration damping systemStarting General safety precautionsFuel safety GeneralAdjusting the harness General working instructionsTransport and storage WARNING! Watch out for thrown objects Basic safety rulesBasic working techniques WARNING! Always stop the engine before cleaningWhat is what on the blower? WHAT IS WHAT?Handlebar ASSEMBLYAccessories Assembling the blow pipe and control handleGasoline FUEL HANDLINGFuel FuelingWarm engine STARTING AND STOPPINGStarting and stopping Cold engineFine adjustment of the idle speed T MAINTENANCEBasic setting Fine adjustmentMuffler Cooling systemSpark plug Cleaning the air filter Air filterOiling the air filter Monthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data TECHNICAL DATAWARRANTY COMMENCEMENT DATE YOUR WARRANTY RIGHTS AND OBLIGATIONSMANUFACTURER′S WARRANTY COVERAGE OWNER′SWARRANTY RESPONSIBILITIESMAINTENANCE, REPLACEMENT AND WHAT IS NOT COVEREDHOW TO FILE A CLAIM WHERE TO GET WARRANTY SERVICEPage ´z+SLG¶5 ¨ ´z+SLG¶5 ¨ Page 1151443-95 ´z+SLG¶5 ¨ ´z+SLG¶5 ¨