Husqvarna M48 Pro, M53 S Pro manual Drive and gearbox, Weekly maintenance, Monthly maintenance

Page 18

MAINTENANCE

Drive and gearbox

M53 S Pro

Ensure the wheels and wheel axles are clean and free from leaves, grass, etc. It is also important to keep clean around the drive gearbox.

Remove the protective cover by unscrewing the screws.

Now guide the protective cover out under the stay and over the drive axle.

Weekly maintenance

1

2

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Lubricate the cutting height system

2Clean the spark plug. Check that the electrode gap is 0.7- 0.8 mm.

3Clean the cooling fins on the cylinder.

Monthly maintenance

Clean the gearbox with a brush. Also check that the drive belt and belt pulley are undamaged, for example, no cracks.

1

4

2 3

5 6

Below you will find some general maintenance instructions.

Daily maintenance

1Check that the engine brake handle works safely.

2Brush leaves, grass and the like off of the lawn mower.

3Clean the air intake on the starter. Check the starter and starter cord.

4Check the oil level.

5Clean the air filter. Replace if necessary.

6Check that nuts and screws are tight.

7Check the cutting attachment. Never use blades that are dull, cracked or damaged.

1Check that drive belt is not damaged and is not visibly defective.

2Clean the gearbox.

3Check the fuel filter and the fuel hose. Replace if necessary.

4Clean the inside of the fuel tank.

5Lubricate the drive control.

6Change the engine oil.

18 – English

Image 18
Contents M48 Pro M53 S Pro KEY to Symbols Key to symbolsSteps before using a new lawn mower Contents Personal protection Safety InstructionsMachine′s safety equipment Cutting cover and protective coverChecking the cutting cover and protective cover Vibration damping systemMuffler Checking the brake triggerGeneral safety precautions Cutting equipmentIncrease the risk of accidents Transport and storage Fuel safetyStarting Before useBasic mowing technique Basic safety rulesGeneral working instructions GeneralAdjusting the cutting height Cutting heightWhat is WHAT? What is what on the lawn mower? M48 ProWhat is what on the lawn mower? M53 S Pro Assembly Fitting the handlebarDismantling and assembling the cutter Petrol Fuel HandlingFuel Engine oilCold engine Starting and StoppingStarting and stopping Warm engineDrive StoppingAir filter MaintenanceMaintenance Spark plugLubrication of the cutting height adjustment CutterChanging the oil Daily maintenance Weekly maintenanceMonthly maintenance Drive and gearboxTechnical Data Technical dataEC-declaration of conformity Applies to Europe onlyPage ´z+H8¶6d¨ Page 1140249-26 ´z+H8¶6d¨ ´z+H8¶6d¨