Husqvarna M48 Pro, M53 S Pro manual Starting and Stopping, Starting and stopping, Cold engine

Page 14

STARTING AND STOPPING

Starting and stopping

WARNING! Note the following before

!starting:

Do not start a lawn mower unless the cutter and all covers are fitted correctly. Otherwise the cutter could come loose and cause personal injuries.

Always move the machine away from the refuelling area before starting.

Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object.

On the M53 S Pro model disengage the drive on the wheel by moving the clutch lever forward.

Keep people and animals well away from the working area.

Cold engine

Ensure the ignition lead sits correctly on the spark plug.

Starting: Open the fuel tap.

Choke: Set the throttle control in the choke position.

Warm engine

Use the same starting procedure as for a cold engine, but do not set the throttle control in the choke position.

Starting

On the M53 S Pro model disengage the drive on the wheel by moving the clutch lever forward.

Pull the engine brake handle against the upper handlebar with your left hand.

Grip the starter handle, slowly pull out the cord with your right hand until you feel some resistance (the starter pawls grip), now quickly and powerfully pull the cord.

Never twist the starter cord around your hand.

Disengage the choke position with the throttle control when the engine is warm.

CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine.

14 – English

Image 14
Contents M48 Pro M53 S Pro Steps before using a new lawn mower KEY to SymbolsKey to symbols Contents Personal protection Safety InstructionsMachine′s safety equipment Cutting cover and protective coverChecking the cutting cover and protective cover Vibration damping systemMuffler Checking the brake triggerIncrease the risk of accidents General safety precautionsCutting equipment Transport and storage Fuel safetyStarting Before useBasic mowing technique Basic safety rulesGeneral working instructions GeneralAdjusting the cutting height Cutting heightWhat is WHAT? What is what on the lawn mower? M48 ProWhat is what on the lawn mower? M53 S Pro Dismantling and assembling the cutter AssemblyFitting the handlebar Petrol Fuel HandlingFuel Engine oilCold engine Starting and StoppingStarting and stopping Warm engineDrive StoppingAir filter MaintenanceMaintenance Spark plugChanging the oil Lubrication of the cutting height adjustmentCutter Daily maintenance Weekly maintenanceMonthly maintenance Drive and gearboxTechnical Data Technical dataEC-declaration of conformity Applies to Europe onlyPage ´z+H8¶6d¨ Page 1140249-26 ´z+H8¶6d¨ ´z+H8¶6d¨