Husqvarna 966609201 manual Stopping

Page 17

STARTING AND STOPPING

CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine.

CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged. Always use gloves. Do not use a machine with damaged spark plug cap.

Set the throttle to the start position by ﬁrst pressing the throttle lockout and the throttle trigger, then pressing the start throttle button (A). Then release the throttle lockout and the throttle trigger, followed by the start throttle button. The throttle function is now activated. To return the engine to idle, press the throttle lockout and throttle trigger again.

Stopping

Stop the engine by switching off the ignition.

CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance.

English – 17

Image 17

Contents 223R Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what on the clearing saw? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentStop switch Vibration damping system Cutting attachment guardQuick release MufﬂerLocking nut Cutting equipmentTrimmer head Cutting equipmentSharpening grass cutters and grass blades Fitting blades and trimmer heads AssemblyFitting the handlebar Fitting a trimmer guard and Superauto II 1 trimmer head Fitting a blade guard, grass blade and grass cutterStandard harness Adjusting the harness and clearing sawFitting other guards and cutting attachments Fuel Fuel safetyFuel Handling Mixing FuellingCheck before starting Starting and StoppingStarting and stopping StartingStopping Working Techniques Basic safety rulesGeneral working instructions Basic working techniquesGrass trimming with a trimmer head Grass clearing using a grass bladeCarburettor MaintenanceCorrectly adjusted carburettor Fine adjustment of the idle speed TAdjusting the start throttle speed High speed jet HBevel gear MufﬂerCooling system Air ﬁlter Cleaning the air ﬁlterDrive shaft Spark plugMaintenance Maintenance scheduleTechnical data Technical DataApplies to Europe only EC-declaration of conformitySuper Auto Page T35 ´z+R9@¶6¨ S35 1150253-26 ´z+R9@¶6¨ ´z+R9@¶6¨