MAINTENANCE
2
11
4
9
14
16
1 |
8
6 | 5 | 19 | 12 | 17 | 18 |
Below follows some general maintenance instructions.
If you need further information please contact your service workshop.
Daily maintenance
1.Check that throttle components work correctly from a safety view point (throttle and starter throttle catch).
2.Clean the
3.Check the tension of the drive belt.
4.Check the condition of the cutting blade.
5.Check the condition of the blade guard.
6.Check the starter and the starter cord; clean the outside of the starter’s air intake.
7.Check that all nuts and bolts are tightened correctly.
8.Check that the
2
9
13
7 | 10 | 15 | 3 | 4 |
Weekly maintenance
9.Check the main filter.
10.Check that the handles and
11.Clean the spark plug. Check that the electrode gap is 0.5 mm.
12.Clean the cooling fins on the flywheel. Check the starter and recoil spring.
13.Clean the cooling fins on the cylinder.
14.Clean the carburettor.
Monthly maintenance
15.Check the clutch drum,
16.Clean the outside of the carburettor
17.Check the fuel filter, fuel hose, change if necessary.
18.Clean the inside of the fuel tank.
19.Check all cables and connections.
English – 21