SAFETY INSTRUCTIONS
3Muffler
!WARNING! During use and for some time after the muffler is very hot. Do not touch the muffler if it is hot!
The muffler is designed to give the lowest possible noise level and to direct the engine‘s exhaust fumes away from the user. The engine‘s exhaust fumes are hot and can contain sparks, which can lead to the outbreak of fire.
MPORTANT INFORMATION! It is extremely important that the instructions for checking, maintaining and servicing the muffler are followed. (see the section “Control, maintenance and service of the power cutter’s safety equipment“).
4Blade guard for the cutting blade
!WARNING! Always check that the blade guard is correctly fitted before starting the machine.
The blade guard is mounted above the cutting blade and prevents cutting fragments from being thrown towards the user.
Control, maintenance and service of the machine‘s safety equipment
!WARNING! All service and repairs to the power cutter require special training. This applies especially to the power cutter’s safety equipment. If the power cutter does not meet any of the controls listed below you should contact your service workshop.
The purchase of one of our products guarantees that professional repair and servicing will be carried out on it. If the point of purchase is not one of our servicing dealers, please ask for details of the closest service workshop.
1 Anti-vibration system
Check the
Check that the
2 Stop switch
Start the engine and make sure that the engine stops when the stop switch is moved to the stop position.
English – 5 |