Husqvarna BCZ3205DL, BCZ3205DW Refilling Trimming Line, AIR Filter, Fuel Filter, Spark Plug

Page 16

BCZ3205DL / BCZ3205DW

9. Maintenance

REFILLING TRIMMING LINE

1.For replacement line, use a diameter of 2.4mm(.095in). The spool is capable for a line upto 6m(20ft) on the 10cm(4”) head. Avoid using a larger line as it may cut down the trimming performance.

WARNING

•For safety reasons, do not use metalreinforced line.

2.Pinch the slotted area on the both sides of the spool housing to unhook the bottom cap.

3.Take out the spool and pull off the old line. Put one end of new line through the spool holes and pull it until the length is equal between each part of the line.

4.Wind up the line in the correct direction as indicated on the spool.

5.Hook each end of the line in the slot on the edge of the spool, and then put the ends through the eyelets on the housing. Make sure that the spring and the washers are in place.

6.While holding the spool against the housing, pull the line ends to release them from the slot.

7.Line up the slot on the bottom cap with the hook on the housing, press the cap against the housing until it clicks.

WARNING

•Make sure that the engine has stopped and is cool before performing any service to the machine. Contact with moving cutting head or hot muffler may result in a personal injury.

AIR FILTER

•The air filter, if clogged, will reduce the engine perfor- mance. Check and clean the filter element in warm, soapy water as required. Dry completely before in- stalling. If the element is broken or shrunk, replace with a new one.

(1) Air filter

(1)

FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage.

(1) Fuel filter

(1)

SPARK PLUG

•Starting failure and misfiring are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a re- placement plug, use the correct type specified by

ZENOAH.

0.9-1.0 mm

•REPLACEMENT PLUG IS A NGK CMR7H-10.

IMPORTANT

•Note that using any spark plug other than those des- ignated may result in the engine failing to operate prop- erly or in the engine becoming overheated and dam- aged.

•To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.

9.8-11.8 N.m.

TIGHTENING TORQUE: (1~1.2 kgm)

GB-16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents BCZ3205DL BCZ3205DW GB-2 Wear head, eye and ear protection E13*97/68SH2G3*2002/88*0098*04Contents Parts locationSpecification Symbols on the machineBCZ3205DL / BCZ3205DW Never modify your machineFor safe operation Working ConditionWorking Circumstance Working PlanBefore Starting Engine Using the ProductStarting the Engine Maintenance If Someone ComesHandling Fuel TransportationSet up Installing Handle BCZ3205DL Installing Handle BCZ3205DWConnecting Throttle Wire BCZ3205DL/DW Connecting Switch Wires BCZ3205DL/DWFuel Starting Engine OperationStopping Engine Adjusting Throttle Cable Adjusting Idling SpeedCutter Application Chart Metal Blade UsageCutting Method Controlling Blade BounceCutting Work Trimmer Head Usage Trimming Grass and WeedsMaintenance Adjusting the Line LengthBlade PointReplacement Plug is a NGK CMR7H-10 Refilling Trimming LineAIR Filter Fuel FilterStorage DisposalLimited warranty Troubleshooting guideCheck Probable Causes Action

BCZ3205DW, BCZ3205DL specifications

The Husqvarna BCZ3205DL and BCZ3205DW are premium brushcutters designed for both professional landscapers and demanding homeowners. Known for their robust construction and advanced technology, these models deliver exceptional performance for cutting through dense vegetation, overgrown grass, and tough weeds.

One of the standout features of both the BCZ3205DL and BCZ3205DW is their powerful engine. Equipped with a reliable 32cc 2-stroke engine, these brushcutters provide ample power to tackle challenging tasks while ensuring efficiency and ease of use. The optimized engine design minimizes fuel consumption and lowers emissions, adhering to modern environmental standards. This makes them not only powerful but also eco-friendly options in the market.

Both models feature a lightweight and ergonomic design, allowing users to operate them comfortably for extended periods. The padded handles and adjustable harness help distribute weight evenly, reducing strain on the user's back and arms. Additionally, the vibration-dampening technology incorporated into the design significantly decreases operational fatigue, making it easier to manage prolonged use on larger properties.

The cutting capability of the BCZ3205DL and BCZ3205DW is impressive, thanks to their dual-line trimmer head. This feature allows for efficient trimming and edging, cutting through tough grass and weeds with ease. The easy-to-load line system ensures quick line replacement, minimizing downtime. Furthermore, both models can be equipped with a range of attachments, including blades and different cutting heads, making them versatile tools for various tasks.

Another key advantage lies in the starting system. Husqvarna's unique starting technology, called Smart Start, significantly reduces the effort required to start the engine. It minimizes resistance in the starter cord by up to 40%, allowing for hassle-free starting every time. This feature is particularly beneficial for users who may be less experienced with outdoor power equipment.

In summary, the Husqvarna BCZ3205DL and BCZ3205DW are high-performance brushcutters that combine power, efficiency, and user comfort. Their advanced technologies, such as the reliable 32cc engine, ergonomic designs, and Smart Start feature, make them excellent choices for both professional and amateur users. Whether you're tackling heavy-duty landscaping projects or performing regular maintenance around your home, these brushcutters deliver results with ease and efficiency.
Top Page Image Contents