Husqvarna BCZ3205DL, BCZ3205DW owner manual Operation, Starting Engine, Stopping Engine

Page 12

BCZ3205DL / BCZ3205DW

8. Operation

STARTING ENGINE

WARNING

The cutting head will start rotating upon the engine starts.

1.Feed fuel into the fuel tank and tighten the cap se- curely.

2.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects, as it will start rotating upon starting of the engine.

3.Push the primer several times until overflown fuel flows out in the clear tube.

4. Move the choke lever to the closed position.

 

(1)

 

 

(2)

(1) choke lever

 

 

 

 

(2) close

 

(3)

(3) open

[BCZ3205DL]

[BCZ3205DW]

 

 

(3)

(3)1

START

2 (3) Stop switch

5. [BCZ3205DL] Set the stop switch to the “I” posi- tion. Set the throttle trigger to the start position (1 → 2 → 3).

Place the unit on a flat, firm place.

Keep the cutting head clear of everything around it. [BCZ3205DW] Set the stop switch to the “RUN” po- sition. Place the unit on a flat, firm place. Keep the cutting head clear of everything around it.

6. While holding the unit firmly, pull out the starter rope quickly until engine fires.

WARNING

The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to ro- tate as soon as the engine is started by putting the throttle trigger into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to en- sure that neither the cutting attachment nor the throttle trigger come into contact with any obstacle when the engine starts.

IMPORTANT

•Avoid pulling the rope to its end or returning it by re- leasing the knob. Such actions can cause starter fail- ures.

7.Move the choke lever downward to open the choke. And restart engine.

8.Allow the engine to warm up for a several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stop- ping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

STOPPING ENGINE

[BCZ3205DL] [BCZ3205DW]

(3)

(3)

START

(3)Stop switch

1.Release the throttle trigger and run the engine for half a minute.

2.Shift the stop switch to the STOP position.

IMPORTANT

•Except for an emergency, avoid stopping the engine

while pulling the throttle trigger.

GB-12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents BCZ3205DL BCZ3205DW GB-2 Wear head, eye and ear protection E13*97/68SH2G3*2002/88*0098*04Contents Parts locationSpecification Symbols on the machineBCZ3205DL / BCZ3205DW Never modify your machineFor safe operation Working ConditionWorking Circumstance Working PlanUsing the Product Before Starting EngineStarting the Engine Maintenance If Someone ComesHandling Fuel TransportationSet up Installing Handle BCZ3205DL Installing Handle BCZ3205DWConnecting Throttle Wire BCZ3205DL/DW Connecting Switch Wires BCZ3205DL/DWFuel Operation Starting EngineStopping Engine Adjusting Throttle Cable Adjusting Idling SpeedCutter Application Chart Metal Blade UsageCutting Method Controlling Blade BounceCutting Work Trimmer Head Usage Trimming Grass and WeedsMaintenance Adjusting the Line LengthBlade PointReplacement Plug is a NGK CMR7H-10 Refilling Trimming LineAIR Filter Fuel FilterStorage DisposalTroubleshooting guide Limited warrantyCheck Probable Causes Action

BCZ3205DW, BCZ3205DL specifications

The Husqvarna BCZ3205DL and BCZ3205DW are premium brushcutters designed for both professional landscapers and demanding homeowners. Known for their robust construction and advanced technology, these models deliver exceptional performance for cutting through dense vegetation, overgrown grass, and tough weeds.

One of the standout features of both the BCZ3205DL and BCZ3205DW is their powerful engine. Equipped with a reliable 32cc 2-stroke engine, these brushcutters provide ample power to tackle challenging tasks while ensuring efficiency and ease of use. The optimized engine design minimizes fuel consumption and lowers emissions, adhering to modern environmental standards. This makes them not only powerful but also eco-friendly options in the market.

Both models feature a lightweight and ergonomic design, allowing users to operate them comfortably for extended periods. The padded handles and adjustable harness help distribute weight evenly, reducing strain on the user's back and arms. Additionally, the vibration-dampening technology incorporated into the design significantly decreases operational fatigue, making it easier to manage prolonged use on larger properties.

The cutting capability of the BCZ3205DL and BCZ3205DW is impressive, thanks to their dual-line trimmer head. This feature allows for efficient trimming and edging, cutting through tough grass and weeds with ease. The easy-to-load line system ensures quick line replacement, minimizing downtime. Furthermore, both models can be equipped with a range of attachments, including blades and different cutting heads, making them versatile tools for various tasks.

Another key advantage lies in the starting system. Husqvarna's unique starting technology, called Smart Start, significantly reduces the effort required to start the engine. It minimizes resistance in the starter cord by up to 40%, allowing for hassle-free starting every time. This feature is particularly beneficial for users who may be less experienced with outdoor power equipment.

In summary, the Husqvarna BCZ3205DL and BCZ3205DW are high-performance brushcutters that combine power, efficiency, and user comfort. Their advanced technologies, such as the reliable 32cc engine, ergonomic designs, and Smart Start feature, make them excellent choices for both professional and amateur users. Whether you're tackling heavy-duty landscaping projects or performing regular maintenance around your home, these brushcutters deliver results with ease and efficiency.
Top Page Image Contents