Starting and stopping the engine | Husqvarna 953900767, 953900791

Lower washer - e) Spacer - f) Rotating mower gauge - g) Blade locking screw (length mm 34,5).

Assembly of sawtooth blade and blade guard

2 3 4 10

When using the sawtooth blade, remove the guard for the line cutter head and grass cutting blade and replace the flange guard (A) with the sawtooth blade guard (H).

Saw tooth blades (24 - 80 tooth) have a central base diametre of 20mm and therefore require the use of the appropriate size top flange to ensure a correct fit. The part number is detailed in the cutting attachment summary chart.

For assembly see figures (E7, E8, E9).

F. Starting and stopping the engine

1 5 6 7 8 9 10111214

During startup, stand in a stable position. (Be careful not to twist the starter cord around your hands). Fasten the shaft to the backpack before undertaking the starting procedure, and release it afterwards. Do not pull the starter cord all the way and do not release it abruptly against the machine as this could damage it.

Startup of cold engine

F1. Stop switch (A) turned to “I” opposite the “STOP” mark.

F2. Turn the fuel enrichment lever (B) to the closed position.

F3. Pump by pressing several times on the bulb (C) until you see the fuel flow back into the tank through the tube (D). Put on the backpack. Pull the starter cord evenly, without jerks, and release it in the same way until the motor

catches. Let the motor run for a few seconds and accelerate. This will automatically return the fuel enrichment lever to its original position.

The cutting devices are now rotating.

Startup of warm engine

F1. STOP switch turned to “I” (START). Throttle trigger lever in minimum position (released).

F4. Enrichment lever (B) in original position.

F3. Repeat item F3 in the previous paragraph.

Stopping the engine

F5. Turn the stop switch (A) to “O” (STOP).

After stopping the engine the rotating parts, blade or nylon string head, keep spinning by inertia for a few seconds.

Grip the machine firmly until they stop. In case of emergency the above delay can be abbreviated by scraping the blade supporting cup parallel on the ground.

G. Carburetor adjustment

8 9 1011

Your machine can be equipped with a low emission carburetor. We recommend that you have any adjustment of the carburetor made exclusively by an authorized service center, which disposes of special equipment for ensuring the best performance with the lowest emissions. To adjust the speed to the minimum, turn the screw marked (T) as shown: With the engine running and well warmed up, turn the screw (T) gently clockwise, until the engine rotates at regular speed (stead noise), without the cutting devices in motion. If the cutting devices are moving, turn the screw (T) gently counterclockwise until you obtain the proper adjustment. The correct minimum speed is

shown in the instruction manual in the paragraph of technical data.

All the above adjustments should be made with the cutting devices correctly installed.

When you start the machine for carburetion, non do not wear the backpack, but set it down and hold it firmly in place with one hand while you use the other to pull the starter cord. Make sure the cutting tool is in a stable, safe position.

The warranty may be invalidated due to erroneous adjustments made by personnel not belonging to authorized service centers.

ENGLISH - 7

2.010 BP, 953900767, 953900768, 953900791 specifications

Husqvarna has long been a leader in outdoor power equipment, known for its innovative technologies and robust product offerings. Among its impressive lineup are the models 953900791, 953900767, 2.010 BP, and 953900768. These products exemplify Husqvarna's commitment to quality, performance, and user-friendly features.

The Husqvarna 953900791 is renowned for its power and efficiency. Designed for heavy-duty use, this equipment boasts a powerful engine that provides ample torque and speed for rigorous tasks. It includes advanced air injection technology, which helps in keeping the air filter cleaner for longer, resulting in less frequent maintenance. The ergonomic design ensures that users can operate it comfortably, reducing fatigue during extended use.

Husqvarna 953900767, on the other hand, is tailored for precision and control. This model features an adjustable cutting depth, allowing users to adapt to various terrains and grass types. The innovative blade design ensures clean cuts, promoting healthier growth. With its lightweight design, the 953900767 is easy to maneuver, making it an excellent choice for both residential lawns and commercial landscaping.

The 2.010 BP model stands out with its superior battery technology. It is designed for those who are environmentally conscious, providing all the power of traditional gas-powered models without the emissions. The 2.010 BP features a rapid charging system, capable of delivering long run times on minimal charge, ensuring that users can rely on it for their demanding tasks. Additionally, this model includes an intuitive control panel, making operation straightforward and efficient.

Lastly, the Husqvarna 953900768 combines versatility and performance. This multi-purpose tool can be utilized for a range of applications, from trimming hedges to clearing brush. Its durable construction ensures that it can withstand the rigors of outdoor work, while its adjustable handle provides ease of use for operators of all sizes. Featuring a robust engine and cutting-edge technology, the 953900768 is built to deliver top-notch results, enhancing the overall efficiency of outdoor projects.

In summary, whether you're in need of heavy-duty power, precision cutting, environmentally friendly options, or versatile tools, the Husqvarna 953900791, 953900767, 2.010 BP, and 953900768 offer a variety of features and technologies designed to meet different user needs. Each model has been crafted to deliver exceptional performance and reliability, reaffirming Husqvarna’s status as a leader in the outdoor power equipment industry.