Husqvarna 335RJx, 333RJ manual Fuel Handling, Fuel safety

Page 14

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage.

•Secure the machine during transport.

•In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long-term storage, if the machine is not under close supervision and when performing all service measures.

!

WARNING! Take care when handling fuel.

Bear in mind the risk of fire, explosion

 

 

and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of petrol and two-stroke oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are

! highly inflammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Petrol

CAUTION! Always use a quality petrol/oil mixture at least 90 octane (RON). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter.

Use low-emission petrol, also known as alkylate petrol, if it is available.

•The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade than 90 so- called knocking can occur. This gives rise to a high engine temperature, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two-stroke engine oil, which is specially formulated for our air-cooled two-stroke engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time of catalytic converters.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

1:33 (3%) with oils class JASO FB or ISO EGB formulated for air-cooled, two-stroke engines.

Petrol, litre

Two-stroke oil, litre

 

 

 

2% (1:50)

3% (1:33)

 

 

 

5

0,10

0,15

 

 

 

10

0,20

0,30

 

 

 

15

0,30

0,45

 

 

 

20

0,40

0,60

 

 

 

14 – English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 333RJ 335RJX-series KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what on the brush cutter?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchCutting attachment guard MufflerLocking nut Sharpening grass cutters and grass blades Cutting equipmentCutting equipment Trimmer head Assembling the cutting equipment AssemblyFitting the J-handle Fitting the guard extensionAssembly Fuel Fuel safetyFuel Handling Muffler gets very hot during and after FuellingMixing Use. This also applies during idling. BeStarting and stopping Starting and StoppingCheck before starting StartingStopping General working instructions Basic safety rulesWorking Techniques Grass trimming with a trimmer head Grass clearing using a grass bladeBasic working techniques Cutting SweepingMuffler MaintenanceCarburettor Air filter Cooling systemBevel gear Oiling the air filter Cleaning the air filterSpark plug Must always be replacedMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no EC-declaration of conformity Applies to Europe onlyPage S35 2,7mm 095-.106 25 m 15 cm T35, T35x T45, T45x Page Page Page Page Original instructions 1153299-26
Related manuals
Manual 32 pages 61 Kb Manual 32 pages 48.24 Kb

333RJ, 335RJx specifications

The Husqvarna 335RJx and 333RJ are powerful and versatile string trimmers designed for both professionals and passionate homeowners. These models boast impressive features and cutting-edge technologies that enable users to handle even the toughest grass and weeds with ease.

One of the standout features of the Husqvarna 335RJx and 333RJ is their lightweight design. Weighing in at just over 10 pounds, these trimmers are easy to maneuver, reducing user fatigue during extended use. The ergonomic handle design provides comfort and control, allowing for precise trimming in tight spaces and around obstacles without strain.

Equipped with a high-performance X-Torq engine, these models deliver superior power and fuel efficiency. This technology reduces harmful emissions, making them environmentally friendly while maintaining impressive performance. The engines are designed to provide more torque at low RPM, enhancing cutting efficiency and enabling users to tackle thicker vegetation without compromising speed.

Both models feature Husqvarna's Auto Return Stop Switch, which simplifies the starting process. The stop switch automatically returns to the ON position, ensuring that the trimmer is ready to go with minimal effort. This design reduces downtime and increases productivity, making the user experience more efficient.

The cutting equipment on the Husqvarna 335RJx and 333RJ is equally impressive. These trimmers come with a high-capacity trimmer head that allows for quick line replacement. The tap-and-go feature permits users to extend the line effortlessly by tapping the head on the ground, enhancing practicality during operation. Furthermore, the cutting width of 18 inches ensures that users can cover a large area in a shorter amount of time.

Durability is a key characteristic of these models. Constructed with high-quality materials, the trimmers are built to withstand rigorous usage, ensuring longevity and reliable performance. The double shoulder harness further distributes the weight evenly, providing additional support during operation and allowing for greater control while trimming.

In conclusion, the Husqvarna 335RJx and 333RJ offer a combination of power, efficiency, and user-friendly design. With their advanced engine technology, comfortable handling, and practical features, these string trimmers are ideal for anyone looking to maintain their landscape with ease and precision. Whether for professional landscaping or home gardening, these models stand out in delivering performance and reliability.
Top Page Image Contents