Husqvarna 327LDX-series manual Fuel Handling, Fuel safety

Page 12

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage.

•In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long-term storage, if the machine is not under close supervision and when performing all service measures.

WARNING! Take care when handling fuel.

! Bear in mind the risk of fire, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of petrol and two-stroke oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are

! highly inflammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Petrol

CAUTION! Always use a quality petrol/oil mixture at least 90 octane (RON). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter.

Use low-emission petrol, also known as alkylate petrol, if it is available.

•The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade than 90 so- called knocking can occur. This gives rise to a high engine temperature, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two-stroke engine oil, which is specially formulated for our air-cooled two-stroke engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time of catalytic converters.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

1:33 (3%) with oils class JASO FB or ISO EGB formulated for air-cooled, two-stroke engines.

Petrol, litre

Two-stroke oil, litre

 

 

 

2% (1:50)

3% (1:33)

 

 

 

5

0,10

0,15

 

 

 

10

0,20

0,30

 

 

 

15

0,30

0,45

 

 

 

20

0,40

0,60

 

 

 

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 327LDX-series KEY to Symbols SymbolsOperator of the machine must Ensure, while working, that no Persons or animals come closerContents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutStop switch Cutting attachment guardVibration damping system MufflerCutting equipment Trimmer headAssembly AssemblyFitting the loop handle Assembling and dismantling the two-piece shaftAssembling the cutting equipment Fitting the trimmer guard and trimmer headFuel safety Fuel HandlingFuel Fuelling MixingStarting and Stopping Check before startingStarting and stopping StartingStopping Basic safety rules Working TechniquesGeneral working instructions Basic working techniques Grass trimming with a trimmer headMaintenance CarburettorFine adjustment of the idle speed T Correctly adjusted carburettorLow speed jet L High speed jet HMuffler Cooling systemSpark plug Remember the risk of fireCleaning the air filter Two-piece shaftAir filter Oiling the air filterBevel gear Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no Approved accessories Art No Use withEC-declaration of conformity Applies to Europe only Attachments Art No Use withPage S35 2,7mm 095-.106 25 m 15 cm T35, T35x T25 Page Page Page Page Page 1151209-26 ´z+S4¶6¨ ´z+S4¶6¨

327LDX-series specifications

The Husqvarna 327LDX-series is a remarkable line of versatile, powerful trimmers designed for both professional landscapers and passionate homeowners. Known for their durability and performance, these trimmers boast features that make them ideal for tackling various outdoor tasks, from trimming grass to maintaining garden edges.

A standout characteristic of the 327LDX series is its lightweight design. Weighing in at just a few kilograms, the trimmers are easy to maneuver, reducing fatigue during extended use. This ergonomic design is complemented by an adjustable handle, allowing users to customize their grip for maximum comfort. Additionally, the split shaft design enables seamless attachment swapping, making it convenient to switch between different tools, such as brush cutters or pole saws.

One of the most impressive aspects of the 327LDX series is its powerful engine. Equipped with a reliable X-Torq engine, these trimmers provide excellent fuel efficiency while significantly reducing harmful emissions. The engine’s design ensures a high torque at lower RPMs, which enhances performance and prolongs the lifespan of the machine. Whether handling thick grass or tough weeds, the 327LDX series delivers consistent power, allowing users to finish jobs efficiently.

The trimmer heads in the 327LDX series are designed for ease of use and efficiency. With the easy-to-load trimmer head, users can quickly and effectively re-string the unit, minimizing downtime. The Auto Return Stop Switch also adds convenience, as it automatically resets to the ON position, making it easy to start the machine again after use.

Furthermore, the Husqvarna 327LDX series is designed with innovative technologies to enhance user experience. The LowVib system helps reduce vibrations during operation, providing a smoother experience and minimizing strain on the hands and arms. This feature is particularly beneficial for professionals who spend long hours trimming and maintaining landscapes.

In summary, the Husqvarna 327LDX-series stands out in the realm of outdoor power equipment. With its lightweight, ergonomic design, powerful X-Torq engine, and user-friendly features, it provides an exceptional balance of performance and comfort. Whether you're a professional landscaper or a homeowner seeking to maintain a pristine garden, the 327LDX series is an excellent choice that promises reliability and effectiveness in every task.
Top Page Image Contents