Husqvarna 268K, 272K manual Start and Stop, Start and stop

Page 15

START AND STOP

Start and stop

!WARNING! Before starting observe the following:

•Do not start the power cut without the cutting arm or cutting head fitted. Otherwise the clutch can come loose and cause personal injury.

•Always move the power cutter from the filling area before starting.

•Ensure that you and the machine stand firmly and that the cutting discs rotates freely.

•Make sure no unauthorised persons are within the working area.

Start

!WARNING! The cutting disc can rotate when the engine starts. Make sure it can rotate freely.

Take hold of the front handle using your left hand. Place your right foot on the lower section of the rear handle and press the power cutter against the ground.

Grip the starter with your right hand, and slowly pull the

Starting a cold engine

IGNITION:

Slide the stop switch to the left.

CHOKE:

Pull out the choke.

DECOMPRESSION VALVE (272K)

Press in the value to reduce the pressure in the cylinder, this makes starting the power cutter easier. The decompression valve should always be used when starting. When the machine has started the value automatically returns to its original position.

START THROTTLE Press down the catch for unintentional throttle (A). Apply full throttle using the throttle (B). Press the start throttle catch backwards (C).

Starting a warm engine

Follow the same procedure as for a cold engine but do not pull out the choke.

C

A

B

starter cord out until you feel some resistance (the pawls grip) now pull quickly and powerfully.

NOTE! Do not pull out the starter cord completely and do not release the starter from the fully extended position. This can damage the power cutter.

Press in the choke as soon as the engine fires and repeat until the engine starts.

When the engine starts, quickly apply full throttle and the start throttle will automatically disengage.

Stop

The engine is stopped by switching off the ignition. (Slide the stop switch to the right.)

English – 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 101 87 70-27 268K/272KSymbol Explanation Symbols on the power cutterSymbols in the Operators Manual Contents Stop switch Safety InstructionsPersonal Safety Equipment Power CUTTER’S Safety EquipmentDisc guard for the cutting disc SilencerTransport and storage General Safety InstructionsCutting Fuel safetyBasic safety precautions General Working InstructionsWater cooling KickbackGeneral Care and storageSpecial discs Cutting Discs and BladesAbrasive discs High speed portable toolsDry diamond discs Using diamond discsCutting discs Diamond discsWhat is what on a power cutter? What is WHAT?Disc guard AssemblyFitting the cutting head Fitting the cutting disc Checking the drive shaft and flangesFuel Handling Fuel mixtureFuelling Start and stop Start and StopMaintenance Adjusting the drive beltChanging the drive belt Carburettor High speed needle H Correctly adjusted carburettorFuel filter Air filterReplacing a broken recoil spring StarterReplacing a broken or worn starter cord Tensioning the recoil springSpark plug Cooling systemSilencer Daily maintenance Weekly maintenanceMonthly maintenance Technical Data 268K 272KCutting equipment English «*2m7§¬ 1998W17

268K, 272K specifications

The Husqvarna 268K and 272K are exemplary models in the realm of professional-grade brushcutters, celebrated for their power, versatility, and user-focused design. These machines are ideal for both demanding commercial applications and extensive gardening tasks, combining advanced technology with robust performance.

At the heart of the Husqvarna 268K and 272K is a powerful two-stroke engine that ensures high torque and performance. These engines are designed with efficiency in mind, delivering optimal power while minimizing fuel consumption and emissions. The X-Torq technology employed in these models reduces harmful exhaust emissions and increases fuel efficiency, making them an environmentally friendly option without compromising on performance. This innovative engine design allows users to maintain productivity during long hours of operation while being conscious of their ecological footprint.

Both models are equipped with an ergonomic design that enhances comfort during use. The handlebar system features soft-grip grips and adjustable components, allowing operators to customize their setup for maximum comfort and control. This attention to ergonomic detail significantly reduces fatigue during prolonged use, making the 268K and 272K ideal for professional landscapers and groundskeepers who tackle large areas on a daily basis.

In addition to the engine and ergonomic design, the cutting capabilities of these brushcutters are noteworthy. They come with a variety of cutting heads, including both trimmers and brushcutting blades, allowing users to tackle different types of vegetation effectively. The inclusion of a lightweight yet durable cutting head reduces overall weight without compromising on strength, which is crucial for efficiency and ease of use in tough conditions.

Convenience features are another highlight of the Husqvarna 268K and 272K. The easy starting system ensures users can get to work quickly, while the simple fuel and oil filling designs minimize downtime between uses. Maintenance is straightforward, with accessible air filters and other components that allow for quick servicing, ensuring the longevity and efficiency of the machines.

Overall, the Husqvarna 268K and 272K showcase a harmonious blend of power, comfort, and cutting efficiency, making them indispensable tools for professionals and DIY enthusiasts alike. Whether it's clearing dense underbrush or trimming grass in hard-to-reach areas, these brushcutters are engineered to deliver outstanding performance and reliability in every task.
Top Page Image Contents