CONTENTS
Before using your new Power cutter
•Read the Operator’s Manual carefully.
•Check the assembly and adjustment of the cutting disc, see chapter ”Assembly”.
•Start the engine and check the carburettor settings. See chapter ”Maintenance”, section ”Carburettor”. When adjusted correctly the cutting disc should not rotate when idling. Setting the idling speed is described in the Operator’s Manual. Adjust the speed according to these instructions. Do not use the power cutter if the idling speed is not correctly adjusted!
•Let your Husqvarna dealer check the power cutter and carry out essential adjustments and repairs.
WARNING!
!Under no circumstances may the original design of a power cutter be modified without the written permission of the manufacturer. Unauthorised modifications can result in safety be jeopardised.
IMPORTANT INFORMATION! A too lean carburettor adjustment significantly increases the risk of an engine breakdown.
Insufficient care of the air filter will cause deposits on the spark plug resulting in abnormal wear to engine parts.
List of Contents |
|
Symbol explanation | 2 |
Safety instructions |
|
Personal safety equipment | 4 |
The power cutter’s safety equipment | 4 |
Control, maintenance and service of the machine‘s safety |
|
equipment | 5 |
General safety instructions | 6 |
Transport and storage | 6 |
Fuel safety | 7 |
General working instructions | 7 |
Cutting | 7 |
Kickback | 8 |
Care and storage | 9 |
Cutting discs and blades | 10 |
Abrasive discs | 10 |
Cutting discs | 11 |
Diamond discs | 11 |
What is what? |
|
What is what on a power cutter? | 12 |
Assembly |
|
Fitting the cutting head | 13 |
Checking the drive shaft and flanges | 13 |
Fitting the cutting disc | 13 |
Fuel handling |
|
Fuel mixture | 14 |
Fuelling | 14 |
Start and stop |
|
Start and stop | 15 |
Maintenance |
|
Adjusting the drive belt | 16 |
Changing the drive belt | 16 |
Carburettor | 17 |
Fuel filter | 18 |
Air filter | 18 |
Starter | 19 |
Spark plug | 20 |
Silencer | 20 |
Cooling system | 20 |
Daily maintenance | 21 |
Weekly maintenance | 21 |
Monthly maintenance | 21 |
Technical Data |
|
268 K | 22 |
272 K | 22 |
English – 3