Uniden WX100 manual Enter the time by pressing

Page 14

5.Then enter the time directly by pressing the numeric keys.

OR

Enter the time by pressing the

/keys. To scroll more quickly (in 15 minute increments), press and hold /keys more than 5 seconds.

6.Press alert to select the desired setting, either a.m. or p.m.

7.Press select to complete the entry. The display goes back to the Menu mode.

11

Image 14
Contents WX100 Precautions Table of Contents Introduction About Your RadioAbout Weather Alert About Fips Codes Obtaining Your Area’s Fips Codes If you call the NWS, follow the instructions you hearTaking Proper Care of Your Radio UnpackingPut the battery into the compartment Replace the cover Installing the BatteryAn hour Make sure the volume control is set to off Getting StartedWX100 can be mounted on a wall using the wall mount adapter Mounting on the WallUsing External Devices Release the buttons to secure the leadsControls & Functions Channel Refers to Weather Channel Setting Initial SettingsClock Setting Enter the time by pressing Weather Channel Setting Press select again to complete the entryAny of the 20 memory locations Fips Code SettingThem or not Press menu key and toggle Alert Type SettingYou can change the Alert Type to one of two options Press / key to chooseAlarm Time Setting Press / key to select Backlight SettingOr OFF To exit the menu mode, press menuTo turn on the weather alert radio Using the RadioOperation Press weather until you hear the weather broadcastMessages are deleted if the volume/off control is turned off To silence the siren, press any key Helpful HintsUser Shortcut Keys Green RedWatch Siren Red ??A None??E ??WTesting the Weather Alert Radio Testing the Alert Siren and Indicators On the displayTroubleshooting AdapterTechnical Specifications ONE-YEAR Extended Warranty Page Memo Thank YOU Uniden America Corporation