Uniden WX100 manual Weather Channel Setting, Press select again to complete the entry

Page 15

Weather Channel Setting

Your radio is preprogrammed with the seven NOAA weather broadcast frequencies (Channel 1-7). Depending on your location, you may be able to receive more than one channel with clear reception.

CH No.

Frequency (MHz)

1

162.550

2

162.400

3

162.475

4

162.425

5

162.450

6

162.500

7

162.525

The first time you use your radio, Channel 1 (162.550 MHz) is automatically set as your weather channel. Depending on your location, you may be able to receive this channel.

To check or change channels, perform the following steps.

1.Turn volume/off control clockwise until it clicks. WX100 appears in the display.

2.Press weather.

3.Adjust the volume control to a comfortable listening level. You may hear the weather broadcast on the initially selected channel. If not or if you wish to select another channel, continue on. Otherwise stop here. Your channel

is set.

4.Press menu.

5.Press ▲/▼ keys until CHANNEL appears.

6.Press select.

7.Press ▲/▼ key to scroll through the list of channels, or press the number key to select the desired channel. The channel number and corresponding frequency appear alternately in the display. If you receive more than one channel, select the one that has the clearest audio.

8.Press select again to complete the entry.

During operation, when the channel information is flashing on the display, you can change the channel using the ▲/▼ key. Then press select to complete the entry.

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents WX100 Precautions Table of Contents About Your Radio IntroductionAbout Weather Alert About Fips Codes If you call the NWS, follow the instructions you hear Obtaining Your Area’s Fips CodesUnpacking Taking Proper Care of Your RadioGetting Started Installing the BatteryAn hour Make sure the volume control is set to off Put the battery into the compartment Replace the coverMounting on the Wall WX100 can be mounted on a wall using the wall mount adapterRelease the buttons to secure the leads Using External DevicesControls & Functions Initial Settings Clock SettingChannel Refers to Weather Channel Setting Enter the time by pressing Press select again to complete the entry Weather Channel SettingFips Code Setting Them or notAny of the 20 memory locations Press / key to choose Alert Type SettingYou can change the Alert Type to one of two options Press menu key and toggleAlarm Time Setting To exit the menu mode, press menu Backlight SettingOr OFF Press / key to selectPress weather until you hear the weather broadcast Using the RadioOperation To turn on the weather alert radioMessages are deleted if the volume/off control is turned off Helpful Hints User Shortcut KeysTo silence the siren, press any key Red Watch SirenGreen ??W None??E Red ??ATesting the Weather Alert Radio On the display Testing the Alert Siren and IndicatorsAdapter TroubleshootingTechnical Specifications ONE-YEAR Extended Warranty Page Memo Uniden America Corporation Thank YOU
Top Page Image Contents