Panasonic EP-MA70 specifications Assembly

Page 14

English

Assembly

1 Attaching the controller stand to the right or left side panel

Fasten the controller stand with the attachment screws. (4 positions)

Use this screw: Attachment screws (M6 × 13)

× 4 pcs. (Black)

How to tighten the screws

Hole

Attachment screw

 

• Tighten the 4 screws lightly

 

using your fingers.

 

(Make the screws level with

 

the holes.)

<When attaching on the right side panel>

• Align the 2 prongs of the side

Controller

panel with the holes of the

Stand

controller stand.

 

Allen key

• Tighten firmly with the allen

 

key.

 

• Screw may be damaged if you

 

tighten the screw inserted

 

into the hole crookedly using

 

an allen key.

2 Fasten the armrest with the attachment screws. (On both sides)

1 Insert the armrest into the unit.

•“R” (right side) and “L” (left side) are indicated at the bottom of the armrest.

•Insert the armrest from the top aligning the marks on the side of the armrest.

•Be careful to avoid pinching your fingers or the air plugs.

2 Slide the armrest toward the front while pushing it downward.

3 Fasten the armrest with the attachment screws. (One position for each side)

Use this screw: Attachment screws (M6 × 20)

× 2 pcs. (Silver)

<When attaching the right armrest>

1

Front

Back

Align the marks.

2

How to tighten the screws

Allen key

• Put an attachment screw on the edge

3

of the allen key and tighten the screw

horizontally to the hole.

• Screw may be damaged if you tighten the screw inserted into the hole crookedly using an allen key.

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operating Instructions Important Safety Instructions EnglishSafety Precautions English Operating Precautions Grounding Instructions Specifications Part names and functions Main unitLeg/Sole massage section Flat section Appliance Inlet Lock Switch Lock Switch Key TagBack Controller Display English Massage Area Installing the unit Setting up the massage loungerWhere to use the unit Fixing screw Main unit Controller English AccessoriesSwitch of the power switch ClipAssembly Appliance inlet Connector Power cord Power switch section Connecting the air plugs On both sidesConnect the power cord to the unit Press once, and then press again approx secondInsert the tip of the fastening band into the hole When the controller stand is attached on the left sideMove the controller cord under the legrest to the left side Fasteners Fasteners Zip Comfort cushion Pillow EnglishLet go Press firmly Check the power cord and the power plugBefore sitting down Check that the legrest is locked into place Make sure the massage heads are in the retracted positionMake sure the legrest is in the fully lowered position Adjust the pillow position Remove the pillow Lower edge of the pillow Ear levelPress one of the buttons Press the button to turn on the powerIf you want a complete massage To select the programReclined At ear levelSee Massage Head Tapping actionOff To customizeTurning the air or stretch massage on or Turning the Heat massage heads on or offNumber of adjustments possible Max times Fine adjustment of the position of the massage headsTo adjust the back intensity To repeat the current massageContents that can be saved Example When using the Refresh programEnglish When saving your preferences is completed To save your preferencesTurn on the power More than 3 seconds Select the program Select the User button with your saved settingsTo delete your saved settings Example Press Button to To start a saved programTo turn the Heat massage heads off To turn the Heat massage heads on or offStart the massage To always have the Heat massage heads turned offBody scanning for Manual Operation Selection of a massage technique and body regionSelect the part you want to massage Select the massage action you preferCombining air massages To change the technique in the middle of a massageIf you want to massage with tap technique only Select your favourite technique in Steps 2toAdding tapping actions to the current operation Fine adjustment of the massage heads positionAdjusting the intensity of the massage To turn the Heat massage heads on or offPerforming Air massage or Stretch action Opening To attach the sole shiatsu sheet Press the buttonFoot massage section Toe Projections are on the upper side HeelHow to use the Hand/Arm massage Operation of the Leg/Sole massage Operation of the Lower back massageOperation of the Hand/Arm massage Operation of the Pelvis Stretch Operations of the Leg StretchApprox ˚ 95˚ Adjustment of the reclining angle and/or legrestPress the or button to adjust the angle 170˚If you experience any problems Press the button After completing the massageStore the legrest Disconnecting the powerSlide the power switch to the off position Press firmly Let goCleaning and Maintenance To put the unit down on the floor Moving the UnitBack cover Legrest How to remove the armrest It is easier to move the unit with the armrest removedRefresh program Ultra Knead Shiatsu Swedish PressMassage heads do not come up to the shoulder or neck TroubleshootingProblem Cause and Remedy Motor Noises Height of the left and right massage heads is differentBackrest does not return to the upright position Problem Cause and Remedy Heat massage heads do not get warmPower cord or power plug is abnormally hot Unit will not operate at allContents Error displayTime Remaining Display Error display ’appareil a été endommagé Le dossier ne retourne pas à la position verticale’appareil ne fonctionne pas du tout FrançaisPanasonic Corporation of North America

EP-MA70 specifications

The Panasonic EP-MA70 is a cutting-edge massage chair that epitomizes comfort, technology, and user-centric design. Its innovative features and advanced technologies make it a standout choice for those seeking a full-body massage experience in the comfort of their own homes.

One of the main highlights of the EP-MA70 is its customized massage capabilities. It is equipped with an advanced roller system that mimics the natural motion of human hands, allowing for various techniques such as kneading, tapping, and shiatsu. This versatility ensures a personalized massage experience tailored to the user's preferences and requirements.

The chair integrates 3D massage technology, which allows the rollers to move not only up and down but also deeper into the back muscles. This depth adjustment enhances the effectiveness of the massage, ensuring that it targets specific muscle groups and provides relief from tension and stress. Users can select from different intensity levels ranging from gentle to deep tissue, catering to a wide array of comfort preferences.

Another remarkable feature of the EP-MA70 is its body scan technology. Utilizing sensors, the chair can detect the user's body shape and size, ensuring that the massage is delivered to the correct areas. This intelligent adaptation enables the chair to provide a truly customized experience, making each session unique to the individual.

The EP-MA70 is also equipped with multiple pre-programmed massage routines. These routines are designed for different needs, whether it's relaxation, muscle recovery, or revitalization after a long day. Each program combines various massage techniques, ensuring versatility in how users can unwind from their daily stressors.

In terms of design, the Panasonic EP-MA70 boasts an aesthetically pleasing and ergonomic structure. The luxurious upholstery provides comfort and is easy to maintain, making it suitable for various interior décors. Additionally, the chair’s compact design does not compromise on functionality while ensuring it fits seamlessly into any living space.

Ultimately, the Panasonic EP-MA70 is not just a massage chair; it is a wellness solution. With its innovative features, advanced technologies, and thoughtful design, it offers users a holistic approach to relaxation and rejuvenation. Whether for everyday stress relief or targeted muscle recovery, the EP-MA70 stands out as a premier choice for anyone looking to invest in their well-being.
Top Page Image Contents