No Diving Warning

WARNING LABEL INSTALLATION

Position warning label in visible area prior to entry of spa.

For instructions, please refer to posted warnings located on page 1

If replacements are needed please contact local dealer and order using part number:

“0461536 - Warning Label”

DO NOT DIVE INTO SPA.

IT CAN CAUSE HARM OR INJURY.

COVER INSTALLATION

Cover

Tie Down

Strap

Lock

Screws (2)	Key

INSTALLING THE SPA COVER

1.Position the cover squarely over the spa.

2.Position the locks for the tie-downs on the sides of the spa. You should allow approximately 13mm to 20mm (1/2” to 3/4”) slack in the straps for ease of insertion into the locks and to allow for material shrinkage during temperature changes.

3.Using the screws provided, attach the locks and insert the cover tie-down straps. Utilizing the cover anytime the spa is not in use will reduce heat loss and thereby reduce the amount of running time required to make up that loss by the heating system.

Keep cover fastened down at all times when not in use.

DANGER - RISK OF INJURY

To reduce the risk of potential injury:

1.Never leave a spa uncovered or unattended.

2.Never leave a spa cover unlocked.

3.Do not stand, sit, or lie on the cover.

ALWAYS REMOVE SNOW FROM THE COVER. THE COVER HAS NOT BEEN DESIGNED TO SUSPEND THE WEIGHT OF WET SNOW.

IF YOUR SPA INCLUDES A COVERLIFTER (DUO & DUOPRO), PLEASE READ INSTALLATION INSTRUCTIONS INSIDE THE BOX

PAGE 3