SPECIFICATIONS |
|
MOTOR |
|
Motor Type | 120 V AC |
Operating RPM | 7500 |
Amperes | 6 amps |
DRIVE SHAFT AND CUTTING HEAD |
|
Drive Shaft | 1/4 in. Flex Shaft |
Cutting Head | Bump Line Release |
Cutting Path Diameter | 15 in. (381 mm) |
Drive Shaft Housing | Aluminum Tube |
Cutting Line Diameter | 080 in. (2 mm) |
UNPACKING |
|
INSTRUCTIONS
nCarefully remove the parts from the box.
nInspect the parts carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have carefully inspected and satisfactorily operated the product.
nIf any parts are damaged or missing, please call
WARNING:
If any parts are missing, replace them before opera- ing the product. Failure to do so could result in seri- ous personal injury.
PACKING LIST
Upper shaft (Power head) (1) Attachment shaft (Cutting head) (1) Front Handle (1)
Carriage bolt - 6 mm x 50.0 mm (1) Flat washer - 6 mm (1)
Wing nut - 6 mm (1) Grass deflector (1) Wing nut - 1/4 in. (1) Flat washer - 1/4 in. (1) Lock washer - 1/4 in. (1) Hex bolt - 1/4 in. x 2 in. (1) Operator’s manual
Page 7