ASSEMBLY
instalLING THE Vacuum handle
See Figure 4.
Lay unit on side as shown.
Insert vacuum handle into the base of unit.
Secure vacuum handle in place using two knobs as shown.
vacuum handle
vacuum handle knobs
Fig. 4
Installing the vacuum bag
See Figures 5 - 6.
Remove the nozzle and upper blower tube from the blower.
Unzip the vacuum bag and place the adaptor inside as shown.
Align the raised slots on the bag adaptor with the raised locking tabs on the blower housing outlet; push the bag adaptor onto the housing. Twist to lock into place.
Rotate the vacuum bag until the shoulder strap is up- right.
Make sure the vacuum bag is zipped and closed before starting the unit.
adaptor
vacuum bag 
Fig. 5
adaptor installed
in vacuum bag
raised | raised | |
slot | ||
locking tab | ||
| ||
| Fig. 6 |
10