Ryobi Outdoor RY49701 manual General Maintenance, Lubrication, Replacing Hydraulic OIL

Page 13

MAINTENANCE

WARNING:

When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

LUBRICATION

All of the bearings in this tool are lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. Therefore, no further lubrica- tion is required.

REPLACING HYDRAULIC OIL

See Figures 12 - 13.

The hydraulic oil in the log splitter needs to be changed every 150 hours of use.

nUnplug the log splitter.

nPosition the log splitter so that the motor end is slightly higher than the oil drain plug.

nUsing an 8 mm hex key, remove the oil drain bolt.

nDrain the hydraulic oil from the oil tank into a four liter capacity container.

nOnce the oil has drained from the oil tank, turn the log splitter on the end with the wheels.

nRefill the oil tank with fresh hydraulic oil (3.7 quarts or

118 oz.). The following hydraulic oils are recommended:

-SHELL Tellus 22

-MOBIL DTE 11

-ARAL Vitam GF 22

-BP Energol HLP-HM 22

nPlace the cleaned dipstick into the oil tank. Remove and check the oil level.

NOTE: The oil level should be between the two grooves around the bottom of the dipstick as shown in figure 5.

nReplace oil drain bolt. Tighten securely.

nDispose old oil at an oil recycling center.

SHARPENING THE WEDGE

After using the log splitter for some time, it may be necessary to sharpen the wedge. Using a fine-toothed file, smooth any burrs or crushed areas along the cutting edge.

POSITION IN WHICH TO CHECK OIL LEVEL

Fig. 12

DRAINING OIL FROM OIL TANK

Fig. 13

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsService Electrical Speed and WiringExtension Cords Grounding InstructionsFeatures Unpacking AssemblyPacking List Assembling the WheelsOperation Before Using the LOG SplitterSee Figures 4 Splitting Logs Starting the LOG SplitterSee Figures 6 See Figures 8See Figures 10 Freeing a Jammed LOGGeneral Maintenance MaintenanceLubrication Replacing Hydraulic OILProblem Possible Cause Solution TroubleshootingMaintenance section Page Service Model NO. and Serial no

RY49701 specifications

The Ryobi Outdoor RY49701 is a versatile, powerful tool designed for homeowners and outdoor enthusiasts who seek efficiency and convenience in their landscaping tasks. As a battery-powered outdoor trimmer, it harnesses cutting-edge technology to provide a clean-cut finish and ease of use for various lawn maintenance applications.

At the heart of the RY49701 is its robust 40V lithium-ion battery, which offers extended run times and reliable power. Users can expect to achieve an impressive runtime, allowing for prolonged use without the hassle of cords or the need to refuel. This feature makes it ideal for larger yards or more demanding trimming tasks.

The RY49701 boasts a cutting width of 15 inches, allowing it to cover significant ground quickly. This efficient cutting path is perfect for managing overgrown lawns, edging pathways, and trimming around flower beds. The adjustable height settings enable users to customize the cutting length based on their specific needs, providing added versatility.

One of the standout features of the Ryobi Outdoor RY49701 is its innovative "Easy Load" spool system, which allows for quick and hassle-free string loading. This design minimizes downtime and ensures that users can swiftly continue their work without fumbling with complicated spool setups.

Additionally, the trimmer is equipped with a telescoping shaft that accommodates different user heights for optimum comfort during operation. The cushioned grip handle enhances user comfort and reduces fatigue, enabling longer trimming sessions without discomfort.

The RY49701 also incorporates a rapid recharge capability, which means that when the battery does run low, it can be quickly recharged, making it ideal for those who need to get back to work in minimal time. This feature further distinguishes it in the realm of battery-powered outdoor tools.

In terms of build quality, the Ryobi Outdoor RY49701 is designed to withstand the rigors of outdoor use. It features durable materials and construction that ensure longevity, even when used frequently.

Overall, the Ryobi Outdoor RY49701 is an exceptional choice for anyone looking to maintain their lawn and garden with ease and efficiency. With its blend of advanced technology, thoughtful design, and user-friendly features, it stands out as a reliable tool for outdoor landscape management.
Top Page Image Contents