Ryobi Outdoor RY46501B manual Installing the Wheel Assembly Accessory, Installing the Tines

Page 10

ASSEMBLY

INSTALLING THE WHEEL ASSEMBLY ACCESSORY

See Figures 3 - 4.

Use the wheel assembly accessory to transport the unit to and from the work area. To install:

Raise the adjustment knob located at the back of the tine shield. Twist slightly to secure in the raised position.

Insert the wheel assembly support rod into the opening beneath the adjustment knob. To place the wheels in a high position, insert the rod to the first hole. For a lower wheel position, insert the rod to the second hole.

Rotate the adjustment knob in the opposite direction to return it to the seated position, which will secure the wheel assembly in place.

Insert the drag bar into the open slot in the wheel as- sembly support rod.

Insert pull pin through holes in support rod, passing through desired hole in drag bar, to secure drag bar at desired height.

INSTALLING THE TINES

See Figure 5.

The cultivator has four tines —two inner tines labeled B and C, and two outer tines labeled A and D. For correct opera- tion of the unit, the tines must be installed in the correct orientation.

Lean the unit back on its wheels so that the handlebar rests on the ground.

Place tine C on the tine shaft to the left of the gear box. The stamped side of the tine should face away from the gear box.

Place tine B on the tine shaft to the right of the gear box. The stamped side of the tine should face away from the gear box.

Place a felt washer on each side of the tine shaft, and slide to rest against the inner tines.

Place the outer tine labeled D on the left side of the tine shaft. The stamped side should face in toward tine C.

Place the outer tine labeled A on the right side of the tine shaft. The stamped side should face in toward tine B.

TINE D

FELTFLAT EDGE

WASHER

 

ADJUSTMENT

KNOB

OPENING

WHEEL ASSEMBLY

SUPPORT ROD

DRAG BAR

POSITION A

Fig. 3

WHEEL ASSEMBLY

DRAG BAR

SUPPORT ROD

 

PULL PIN

POSITION B

Fig. 4

NOTE: When installed correctly, the angled edge of the tine blades should face the ground.

To secure the tines to the tine shaft, insert the hitch pin into the holes located on either side of the tine shaft.

NOTE: The unit will not operate properly if the tines are in- stalled incorrectly. If you notice a problem with the cultivating operation of the unit, check for proper tine positioning.

GEAR BOX

FELT

TINE A

WASHER

 

 

 

 

 

 

HITCH PIN

HITCH PIN

ANGLED EDGE

TINE C

TINE SHAFT

TINE B

Fig. 5

 

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read These InstructionsSpecific Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Electrical Connection ElectricalDouble Insulation GfciSwitch Trigger Product SpecificationsSwitch LOCK-OUT Know Your CultivatorPacking List AssemblyUnpacking Positioning the HandlebarInstalling the Tines Installing the Wheel Assembly AccessorySee Figures 3 Applications OperationAdding Sand STARTING/STOPPING CultivatorPreparing the Seed BED General Cultivating To remove the two outer tinesAdjusting Drag BAR Position AdjustmentsAdjusting Wheel Position See Figures 11Maintenance TroubleshootingWarranty Limited Warranty StatementPage Service Model NO. and Serial no

RY46501B specifications

The Ryobi Outdoor RY46501B is a versatile and powerful tool designed for the modern homeowner and outdoor enthusiast. This 4-stroke gas-powered string trimmer offers outstanding performance and reliability, making yard work less of a chore and more of a pleasure. With its robust design and cutting-edge features, it's a top choice for those looking to maintain a pristine lawn.

One of the standout features of the RY46501B is its 30cc engine, which delivers powerful trimming capabilities while keeping vibration levels low for user comfort. The engine's 4-stroke design eliminates the need for mixing oil and gas, simplifying maintenance and usage. Users can simply fill the tank with fuel, making it more convenient for those who want to get their outdoor tasks done efficiently.

The RY46501B showcases Ryobi's commitment to innovation with its attachment capability. This feature allows the user to convert the trimmer into various gardening tools, such as a cultivator, hedge trimmer, or blower, by simply swapping out the attachment. This versatility makes it an excellent investment, as it can adapt to a wide range of gardening needs.

Another noteworthy characteristic is the 18-inch cutting width, which promotes efficient trimming, allowing you to cover a larger area in less time. The bump feed head facilitates quick and easy line advancement with just a tap on the ground, ensuring you can keep working without interruptions. Its dual-line system provides enhanced cutting power, making it ideal for tackling thick grass and weeds.

The ergonomic design of the RY46501B enhances user comfort, featuring a curved shaft that allows for better maneuverability and reduced fatigue during extended use. The cushioned handle provides a secure grip, ensuring you maintain control while working in various positions.

Additionally, the trimmer comes equipped with anti-vibration technology, which minimizes vibrations transmitted to the user’s hands, ultimately leading to a more enjoyable trimming experience.

Overall, the Ryobi Outdoor RY46501B is a powerful and efficient tool that combines user-friendly features with cutting-edge technology. Its versatility, comfort, and performance make it a top contender for anyone seeking to elevate their outdoor maintenance routine. Whether you are a casual gardener or a dedicated lawn care enthusiast, this trimmer is engineered to meet your needs and exceed your expectations.
Top Page Image Contents