Ryobi Outdoor RY46501B manual Maintenance, Troubleshooting

Page 15

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.

WARNING:

Before inspecting, cleaning or servicing the machine, unplug the power cord and wait for all moving parts to stop. Failure to follow these instructions can result in serious personal injury or property damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at an Authorized Service Center.

STORING THE CULTIVATOR

The following steps should be taken before storing the cul- tivator for the season.

Clean dirt, grass, and other materials from the entire unit.

Wipe the tines with oil or spray them with silicone lubricant to prevent rusting.

Oil the switch trigger cable and all visible moving parts. Do not remove the motor cover.

Order new parts to replace any that are badly worn or broken.

Store in an upright position in a clean, dry place. Store with the handles in the extended position, or loosen handle knobs and fold handles down. Do not allow switch trigger cable to become pinched when lowering the handlebar.

PREPARING FOR USE AFTER STORAGE

The following steps should be taken before using the cultiva- tor after it has been stored.

Unfold the handles into the upright position and secure by tightening handlebar knobs. Do not allow the switch trigger cable to become pinched when raising the handle- bar.

Follow the steps on page 11 to restart the cultivator.

TROUBLESHOOTING

PROBLEM

CAUSE

REMEDY

Motor fails to start when switch trig-

Power cord is not plugged in or con-

Plug in the power cord.

ger is depressed.

nection is loose.

 

 

Household circuit breaker is tripped.

Check circuit breaker.

 

 

 

Motor runs but tines do not move.

Gear train failure.

Take unit to authorized service center.

 

 

 

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead These Instructions General Safety RulesSpecific Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsService Gfci ElectricalDouble Insulation Electrical ConnectionKnow Your Cultivator Product SpecificationsSwitch LOCK-OUT Switch TriggerPositioning the Handlebar AssemblyUnpacking Packing ListInstalling the Wheel Assembly Accessory Installing the TinesSee Figures 3 STARTING/STOPPING Cultivator OperationAdding Sand ApplicationsPreparing the Seed BED To remove the two outer tines General CultivatingSee Figures 11 AdjustmentsAdjusting Wheel Position Adjusting Drag BAR PositionTroubleshooting MaintenanceLimited Warranty Statement WarrantyPage Service Model NO. and Serial no

RY46501B specifications

The Ryobi Outdoor RY46501B is a versatile and powerful tool designed for the modern homeowner and outdoor enthusiast. This 4-stroke gas-powered string trimmer offers outstanding performance and reliability, making yard work less of a chore and more of a pleasure. With its robust design and cutting-edge features, it's a top choice for those looking to maintain a pristine lawn.

One of the standout features of the RY46501B is its 30cc engine, which delivers powerful trimming capabilities while keeping vibration levels low for user comfort. The engine's 4-stroke design eliminates the need for mixing oil and gas, simplifying maintenance and usage. Users can simply fill the tank with fuel, making it more convenient for those who want to get their outdoor tasks done efficiently.

The RY46501B showcases Ryobi's commitment to innovation with its attachment capability. This feature allows the user to convert the trimmer into various gardening tools, such as a cultivator, hedge trimmer, or blower, by simply swapping out the attachment. This versatility makes it an excellent investment, as it can adapt to a wide range of gardening needs.

Another noteworthy characteristic is the 18-inch cutting width, which promotes efficient trimming, allowing you to cover a larger area in less time. The bump feed head facilitates quick and easy line advancement with just a tap on the ground, ensuring you can keep working without interruptions. Its dual-line system provides enhanced cutting power, making it ideal for tackling thick grass and weeds.

The ergonomic design of the RY46501B enhances user comfort, featuring a curved shaft that allows for better maneuverability and reduced fatigue during extended use. The cushioned handle provides a secure grip, ensuring you maintain control while working in various positions.

Additionally, the trimmer comes equipped with anti-vibration technology, which minimizes vibrations transmitted to the user’s hands, ultimately leading to a more enjoyable trimming experience.

Overall, the Ryobi Outdoor RY46501B is a powerful and efficient tool that combines user-friendly features with cutting-edge technology. Its versatility, comfort, and performance make it a top contender for anyone seeking to elevate their outdoor maintenance routine. Whether you are a casual gardener or a dedicated lawn care enthusiast, this trimmer is engineered to meet your needs and exceed your expectations.
Top Page Image Contents