Power, IEC Mains, Subwoofer Output, Inputs, Mono

Rear Panel

9Subwoofer

This control sets the output level of the subwoofer signal, which is the sum of the

subharmonic output, the low frequency bass output, and the information from the 90 Hz cross-over net- work (if not disabled by the crossover disable switch). When the bypass switch is engaged the subwoofer is disabled.

10Power

Depressing the power switch supplies power to the unit.

11IEC Mains

Connect the supplied AC mains cord here. Make sure that the correct voltage is applied, or damage to the unit could result. (See markings on unit.)

US DOMESTIC AC MAINS CORD:

The mains cord supplied with the unit is a heavy-duty, 3-conductor type with a conventional 120 VAC plug with ground pin. If the outlet used does not have a ground pin, a suitable grounding adapter should be used, and the third wire should be grounded properly.

Never remove or cut the ground pin of the line cord plug. The console is supplied with a properly rated line cord. If lost or damaged, replace this cord with one of the proper rating.

NOTE FOR UK ONLY:

If the colors of the wires in the mains lead of this unit do not correspond with the colored markings iden- tifying terminals in your plug, proceed as follows: (1) The wire that is colored green and yellow must be connected to the terminal marked by the letter E, or by the earth symbol, or colored green or green and yellow. (2) The wire that is colored blue must be connected to the terminal that is marked with the letter N, or colored black. (3) The wire that is colored brown must be connected to the terminal that is marked with the letter L or colored red.

12Subwoofer Output

This 1/4” TRS electronically balanced output can be used in either balanced (with a 1/4” TRS jack) or un- balanced (standard 1/4” jack) mode. The levels will automatically match the configuration. This output supplies the signal for the subwoofer amplifier (line level).

13Left and Right Outputs

The left and right outputs are electronically balanced, with pin 2 (and tip) positive. The XLR and 1/4” TRS phono jacks are directly wired in parallel. They should not be used on the same channel at the same time since the output balance would not necessarily be maintained, especially if a balanced and an unbalanced connector were used.

14Inputs

The left and right input jacks are balanced with pin 2 (and tip) positive. The XLR and 1/4” TRS jacks are directly wired in parallel. Balanced or unbalanced inputs can be used. As mentioned above, do not use both the XLR and the 1/4” inputs on the same channel at the same time or an imbalance could occur, compromising the unit’s hum and noise rejection.

15Mono

This switch converts the Kosmos® v2 to monophonic operation by selecting the left/mono input jack as the source and routing it to both the left and right signal paths internally. The right input jacks are dis- abled in this mode. Both the left and right outputs function, with only the high frequency stereo circuitry causing a difference between them. When the unit is used as an insert effect, the switch should be set to mono to operate properly.

V2 specifications

The Peavey V2 is a standout product in the realm of musical amplification, known for its versatility, power, and advanced features tailored for musicians across various genres. Designed to meet the needs of guitarists and bassists alike, the V2 line combines cutting-edge technology with Peavey’s signature reliability and durability.

One of the main features of the V2 is its impressive power output. With options typically ranging from 50 to 120 watts, it provides ample headroom for gigging musicians. This power is complemented by an effective speaker cabinet design that enhances sound projection and clarity, ensuring that every note can be heard distinctly in any performance setting.

The V2 incorporates a bi-amped design that separates low and high frequencies, which allows for richer and cleaner sound reproduction. This technology ensures that frequencies are processed independently, resulting in a more balanced tonal profile. Musicians can experience a fuller sound that enhances both their playing and the overall listening experience.

Another defining characteristic of the Peavey V2 is its extensive tonal options. The amplifier offers a range of EQ controls, allowing musicians to shape their sound precisely to their liking. With intuitive controls for bass, midrange, treble, and presence, players can easily dial in their perfect tone, whether they are looking for a crisp high end or a warm, rounded low end.

The V2 also includes built-in effects that provide added versatility for players. Features like reverb, delay, and modulation effects can be quickly accessed and adjusted, allowing musicians to enhance their sound without the need for additional pedalboards. This is particularly beneficial for guitarists who prefer a compact setup while still retaining creative freedom.

Durability is a cornerstone of the Peavey brand, and the V2 is no exception. Constructed with high-quality materials and a robust design, this amplifier is built to withstand the rigors of frequent travel and performance. The rugged chassis and protective grilles ensure that the unit can endure the bumps and scrapes associated with life on the road.

In summary, the Peavey V2 is an amplifier that harmoniously blends power, versatility, and durability. With its bi-amped design, extensive tonal controls, integrated effects, and rugged construction, it’s an excellent choice for musicians seeking an adaptable solution for their amplification needs. The V2 continues to uphold Peavey's reputation for innovation in the music industry, making it a favorite among both aspiring and professional musicians.