Harman GTO-5EZ, GTO-3EZ owner manual Connections, Mounting the Amplifier, Auto Turn-On Switch

Page 3

English

Mounting the Amplifier

NOTE: You may find it more convenient to make all of the connections to the amplifier before you permanently mount it to the vehicle.

Before mounting the amplifier you must remove the two end caps to expose the mounting holes and the connections. Using a Phillips screwdriver, remove the attachment screws and then the end caps, as shown in the illustration. Put the screws in a safe place, so you can use them to reattach the end caps after you have made all the connections to the amplifier.

NOTE: Before you permanently mount the amplifier, read Auto Turn-On Switch, below, to determine the setting of the switch, which is located on the amplifier’s bottom panel.

1.Select a suitable mounting location as described above.

2.Using the amplifier as a template, mark the locations of the mounting holes on the mounting surface.

3.Drill pilot holes in the mounting surface.

4.Attach the amplifier to the mounting surface with four appropriate mounting screws of your own choice. We suggest using #8 Phillips-head sheet metal screws. Make sure the amplifier is mounted securely.

Connections

IMPORTANT: Disconnect the vehicle’s negative (–) battery terminal before beginning the installation.

If you have not already done so, remove the two end caps that cover the amplifier’s connectors as explained in

Mounting the Amplifier, above. This will provide easier access to all of the amplifier’s connectors.

Auto Turn-On Switch

No remote turn-on connection is necessary because GTO amplifiers include signal-sensing turn-on, which will turn the amplifier on when it receives an audio signal at any of its input connectors. The amplifier will automatically turn off approximately five minutes after the input signal ceases.

If your audio system’s source unit includes a remote turn-on wire and you would prefer to use it, the amplifier will sense that you’ve used a remote turn-on wire and that connection will override the signal-sensing turn-on. If necessary, you can defeat the signal-sensing turn-on circuit by moving the Auto Turn-On switch to the “Off” position.

www.jbl.com 3

Image 3
Contents GTO-5EZ/GTO-3EZ Location and Mounting Included ItemsAuto Turn-On Switch ConnectionsMounting the Amplifier Connecting the Power and Ground Using the ConnectorsGround Connection GTO-5EZ GTO-3EZ Power ConnectionSpeaker Connections Stereo operationGTO-5EZ GTO-5EZ bridged operation high-power for front speakersRouting Switches Connecting the InputsInput Connections Crossover Filter Selector Setup ProcedureControls Set the CrossoverSet the Gain LED TroubleshootingPower/Protection LED Bass BoostProblem Causes and solutions Specifications English

GTO-5EZ, GTO-3EZ specifications

The Harman GTO-3EZ and GTO-5EZ are compelling offerings from Harman's extensive range of car audio products. Both models showcase superior engineering and innovative technologies that make them standout choices for audiophiles and casual listeners alike.

Starting with the GTO-3EZ, this three-way speaker system emphasizes a balanced sound profile. It features a 3-inch polycarbonate woofer that ensures bass performance is both deep and smooth. The addition of a 1-inch textile dome tweeter enhances clarity in the high frequencies, providing a more immersive listening experience. Notably, the GTO-3EZ is designed with an integrated crossover network, enabling an accurate distribution of frequencies across the speaker components. This ensures that each driver operates efficiently within its designated frequency range, resulting in a cohesive sound stage.

The GTO-5EZ takes the performance a step further with its five-way speaker configuration. Featuring a larger 5.25-inch woofer, the GTO-5EZ excels in delivering richer bass and enhancing volume levels without distortion. Accompanied by a 1-inch soft dome tweeter, this speaker captures the intricacies of vocals and instruments, giving listeners a truly engaging experience. This model also incorporates an advanced silk dome midrange driver, providing superior mid-frequency clarity that complements both vocal and instrumental tracks.

Both models utilize Harman’s proprietary EQ settings which allow users to tailor their listening experience. This feature offers a selection of preset equalizer options, helping users achieve optimal sound depending on their personal preferences or specific musical genres. In addition, the speakers employ a robust build quality with durable materials that ensure longevity and resilience against harsh automotive environments.

The GTO-3EZ and GTO-5EZ are also designed for easy installation, featuring adaptable mounting hardware that caters to a variety of vehicle models. With a sleek aesthetic, they blend seamlessly into car interiors, enhancing the overall look without compromising on performance.

Overall, the Harman GTO-3EZ and GTO-5EZ are exemplary choices for those seeking top-notch car audio solutions. With their state-of-the-art technologies, thoughtful design, and exceptional sound quality, these speakers promise to elevate any driving experience, making each journey a melodious adventure.