Pioneer 101 owner manual Toggle switch to the Right Classifies

Page 7

OPERATION

TONE MODE AUDIO RESPONSES

NO

RESPONSE

LOW

TONE

BROKEN

TONE

HIGH TONE

Iron & Steel

Gold & Nickel

Old & New Pull Tabs Copper, Silver & Brass

TONE DISCRIMINATION (continued)

(Toggle switch to the Right) Classifies

detected metal objects by emitting a low or high tone.

Adjust the DISCRIMINATE control higher to increase the range of the low tone. It is possible to set the DISCRIMINATE level so

that nickels have a low tone, larger coins have a high tone, and pull-tabs have a low tone or in-between “broken” tone. The

"broken" tone makes pull-tabs and trash easily recognizable. Sensitivity will be reduced slightly when using the Pioneer 101 in the Tone

Discrimination mode. If you want optimal depth capability, operate in the All Metal mode by turning the Discriminate control

completely counterclockwise; then turn the

Sensitivity control clockwise to its highest

clockwise position without chatter. If your

Pioneer 101 chatters or beeps erratically, reduce the Sensitivity by turning the left knob counterclockwise.

7

Image 7
Contents Basics Metal Detecting Introduction Pioneer 101 FeaturesBottom view Easy AssemblyBatteries Follow these steps to install the batteriesII. Position your Pioneer Pioneer 101 DemonstrationThree Modes of Operation OperationToggle switch to the Right Classifies Auto Grouind Control Field Cont Troubleshooting Care and Maintenance Coinshooting Metal Detecting ApplicationsMetal Detecting Applications Inch Coil AccessoriesTreasure HUNTER’S Code of Ethics