Pioneer 101 owner manual Field

Page 9

INTHEFIELD

STANCE

Stand with your arm extended in front of your body. Don’t bend or stoop; stand in a comfortable position. Hold the unit so that the search coil is about 1/2-inch above the ground. Adjust the search coil so that it is parallel to the ground.

SWEEP

Standing in the search position, swing the search coil gently from side to side, slightly overlapping each sweep as you move forward. Keep your search coil approximately 1/2-inch above

the ground as you search. Raising it during the sweep , or at the ends of your sweep, can cause false readings. Move slowly; hurrying will cause you

to miss targets.

Most desireable objects will respond with a repeatable tone. When discriminating, iron and foil objects generally do not respond. False signals can be caused by trashy ground, electrical interference, or by large irregular trash objects. These signals are easily recognized by their often broken or non-repeatable nature.

CORRECT

WRONG

9

Image 9
Contents Basics Metal Detecting Introduction Pioneer 101 FeaturesBottom view Easy AssemblyBatteries Follow these steps to install the batteriesII. Position your Pioneer Pioneer 101 DemonstrationThree Modes of Operation OperationToggle switch to the Right Classifies Auto Grouind Control Field Cont Troubleshooting Care and Maintenance Coinshooting Metal Detecting ApplicationsMetal Detecting Applications Inch Coil AccessoriesTreasure HUNTER’S Code of Ethics