Pride Mobility INFMANU2127 manual Introduction, Use, To place the Pride Profile on the chair

Installation and Care Instructions 3

INTRODUCTION

Welcome to Pride Mobility Products Corporation (Pride). Congratulations on the purchase of your new Pride Profile cushion. The Pride Profile is designed with the most advanced state-of-the-art components to deliver comfort, durability, and health maintenance features for active users.

This manual is intended as a supplement to the in-service training provided by your authorized Pride provider. If you have any questions or problems regarding the Pride Profile, please contact your authorized Pride provider.

USE

The Pride Profile is labeled to assure proper placement on the chair.

To place the Pride Profile on the chair:

1.Locate the “Front Bottom” label on the underside of the cushion.

2.Place the cushion on the seat so that the “Front Bottom” label is located on the front of the seat, label side facing down. The zipper on the cushion will face the rear side of the seat. See figure 1.

ZIPPER FACING

REAR SIDE OF SEAT

Figure 1. Cushion Placement

Pride Profile www.pridemobility.com Rev B/January 2003