4 | Installation and Care Instructions |
CLEANING
The Pride Profile can be easily cleaned.
To clean the Pride Profile:
1.Locate the zipper on the rear side of the outer cover. See figure 2.
2.Unzip the outer cover and pull out the inner cushion, which is wrapped in a fluid resistant cover.
3.Wash the outer cover in a washing machine on the COLD setting.
CAUTION: Do not use bleach when washing the outer cover. Doing so may cause damage to the cover.
4. Spray the inner
CAUTION: Never submerge the inner cushion of your Pride Profile in water. Doing so may cause damage to the cushion.
5. Allow both the outer cover and inner covers to air dry.
CAUTION: Do not attempt to put the outer cover in a dryer. This may cause shrinking.
6.Once dry, put the inner cushion back inside the outer cover. Zip the outer cover closed, and place the Pride Profile back onto the seat of your chair.
INNER CUSHION WRAPPED
IN
OUTER COVER
ZIPPER ON
REAR SIDE
Figure 2. Pride Profile (Inner Cushion Removed)
Pride Profile | www.pridemobility.com | Rev B/January 2003 |