Porter-Cable A08058-0412-0, PCH3740 Read and Understand ALL Warnings Before Starting Unit

Page 11

READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT

When using the high pressure setting, DO NOT allow the high pressure spray to come in contact with unprotected skin, eyes,

or with any pets or animals. Serious injury can occur.

Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

NEVER fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

NEVER fill fuel tank completely. Fill tank to 1/2" below bottom of filler neck to provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting engine.

NEVER run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

DO NOT let hoses come in contact with very hot engine muffler during or immediately after use of your pressure washer. Damage to hoses from contact with hot engine surfaces will NOT be covered by warranty.

NEVER pull water supply hose to move pressure washer. This could damage hose and/or pump inlet.

DO NOT use hot water, use cold water only.

NEVER turn water supply off while pressure washer engine is running or damage to pump will result.

DO NOT stop spraying water for more than two minutes at a time. Pump operates in bypass mode when spray gun trigger is not pressed. If pump is left in bypass mode for more than two minutes internal components of the pump can be damaged.

If you do not understand these precautions, please call 1-888-559-8550 to speak to a service representative for further instructions.

HOW TO USE SPRAY WAND

The nozzles for the spray wand are stored in nozzle holder on the panel assembly. Colors on the panel identify nozzle location and spray pattern. See chart to choose the correct nozzle for the job to be performed.

Nozzle Color

Red

Yellow

Green

White

Black

 

15º

25º

40º

low pressure

Spray

 

 

 

 

 

Pattern

 

 

 

 

 

 

 

 

 

 

 

 

powerful

intense

intense

covers wide

applies

Uses

pinpoint for

cleaning of

cleaning of

areas of

cleaning

very intense

 

small areas

larger areas

cleaning

solutions

 

cleaning

 

 

 

 

 

 

Metal or

metal,

metal,

metal,

metal,

Surfaces *

concrete

concrete,

concrete, or

concrete, or

concrete,

DO NOT use

wood, or

 

on wood

wood

wood

wood, or vinyl

vinyl

*

The high pressure spray from your pressure washer is

 

capable of causing damage to surfaces such as wood,

glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.

11- ENG

A08058

Image 11
Contents Horsepower 3700 PSI Risk of Explosion or Fire Safety Guidelines DefinitionsConsumer Safety Information Risk to Fluid Injection Risk of Explosion or FireRisk to Breathing Risk of Electrical Shock Risk of Chemical BurnRisk of Injury from Spray Risk of Unsafe OperationAssembly Instructions Carton ContentsHose end with swivel Assembly hose reelDo not operate this hose reel until A08058 ENG Choke Control Opens and closes carburetor choke valve Operating InstructionsBasic Elements of a Pressure Washer Pressure Washer Terminology Pressure AdjustmentsRead and Understand ALL Warnings Before Starting Unit HOW to USE Spray WandChanging Nozzles on Spray Wand HOW to Apply Chemicals and Cleaning SolventsShutting Down StartingEngine Pump MaintenanceHow To Change Pump Oil Remove filter Filter Screen by grasping Nozzle CleaningHOW to Clean the Water Inlet Filter HOW to Remove the WheelsPressure Washer StorageCausecorrection ProblemProblem Cause Correction ENG A08058 Limited Warranty