3.Assembly hose reel.
a.Attach handle to flange assembly. NOTE: Screws must be inserted from the inside of hose reel and secured with nuts on the outside as shown. Tighten securely.
b.Bolt hose reel to reel bracket as shown. Tighten securely.
e.Make a loop in hose as shown. Place hose into hose clamp (3), squeeze hose clamp together, slide onto long screw post, and secure with nut (4). Tighten securely. NOTE: Do not overbend or kink hose.
3
4
f. Turn handle and reel hose onto reel.
c. Apply sealant tape to swivel end of high pressure hose.
hose end with swivel
d. Feed high pressure hose through slot (1) in flange assembly and connect to swivel (2). Tighten securely.
1 
g.Attach hose reel inlet to high pressure pump.
2 
Do not operate this hose reel until
you have read and understood the Pressure Washer Owners Manual for Safety, Operation, and Maintenance Instructions.
7- ENG | A08058 |